DNIXD99
04-20-2020, 09:26 AM
28498
One of my front ballast pumps doesnt have power. I switched the connections, and both pumps are definitely working. Ive been working on the boat all weekend. From under the dash, all through the bow, to the amplifier. I added an amp, subs, and plumbed a bow bag. Im sure I knocked something loose
somewhere, or blew an inline fuse, if there is one.. What I need to know is how the wires run between the toggle switch and front pumps. Is there an inline fuse, ect.? Im going back today with a voltmeter, ect., and Im sure Ill find the problem, but it would be a lot easier if I knew how its laid out between the toggle switch and the pumps. Basically fill in the dotted lines on my crappy drawing.
One of my front ballast pumps doesnt have power. I switched the connections, and both pumps are definitely working. Ive been working on the boat all weekend. From under the dash, all through the bow, to the amplifier. I added an amp, subs, and plumbed a bow bag. Im sure I knocked something loose
somewhere, or blew an inline fuse, if there is one.. What I need to know is how the wires run between the toggle switch and front pumps. Is there an inline fuse, ect.? Im going back today with a voltmeter, ect., and Im sure Ill find the problem, but it would be a lot easier if I knew how its laid out between the toggle switch and the pumps. Basically fill in the dotted lines on my crappy drawing.