DIY Surf Deck

[996scott]

Ive been wanting to do this for a while and since work has shut down i decided to get started a few weeks ago. I basically followed aerolland's design from this thread.

https://forum.moomba.com/showthread.php?29742-Surf-Platform-DIY

I'm not done yet but this is where i am at so far:

First picture is the shape and size compared to the oem swim deck.

2nd picture is after the first coat of epoxy mixed with a black die. I thought this would be better than using clear epoxy and painting it later.

3rd picture is after sanding down the first coat starting with 80grit down to 220grit. There was a lot of dripping that happened over the edges (you can see it in the picture) so a fair amount of sanding was needed. I kind of like the dull "matte" finish look.

4th picture is after the 2nd coat of epoxy. I did a much better job on the 2nd coat but will still sand down to probably something like a 2000grit and then polish to get the high gloss look back so it matches the boat.

I'll update as i get more done.

[Stazi]

Looks great!


Sent from my iPhone using Tapatalk

[Craz16]

Looks great. What products did you use for your epoxy


Sent from my iPhone using Tapatalk

[996scott]

I used Total Boat.

https://smile.amazon.com/gp/product/B06XH4SM6H/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

[Branden967]

I used Total Boat.

https://smile.amazon.com/gp/product/B06XH4SM6H/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I’ve worked with similar stuff, but only clear. What did you use to add the black in?

Just a little trick I also learned if you use a heat gun or really lightly use a torch it sucks the bubbles out quicker. (Yours looks awesome, just curious if you heated it?)

[996scott]

this is the dye i used. only need a few drops mixed in and it worked awesome.

https://smile.amazon.com/gp/product/B06XD39K55/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Yea i did use both a torch and a heat gun to get the bubbles out. I watched a lot of videos on how to do it otherwise i ever would have guessed to use heat. Thanks, it turned out pretty good, not perfect but pretty good.

[ssevey17]

How much epoxy did you end up using?

[996scott]

i ended up buying two of the quart size. After doing the first layer i realized i was going to need another quart for the 2nd layer. I have about 1/3 of the 2nd quart left over but may end up using it to make some "lifts" to raise it up some. Haven't started to mount it to the brackets yet so i don't know how high or low it will sit compared to the oem one.

[aerolland]

Looks great! I love the black tint in the epoxy, I will do that to the next one I build, if there is a next one. My current one is holding up strong so far! Glad to have been able to contribute to someone else's DIY abilities!!!


For your risers (and maybe a future DIY fresh air) check out this link:

https://forum.moomba.com/showthread.php?31901-Exhaust-Modifications&p=330160#post330160

[trayson]

this is the dye i used. only need a few drops mixed in and it worked awesome.

https://smile.amazon.com/gp/product/B06XD39K55/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Yea i did use both a torch and a heat gun to get the bubbles out. I watched a lot of videos on how to do it otherwise i ever would have guessed to use heat. Thanks, it turned out pretty good, not perfect but pretty good.

I did my bathroom counter with a clear epoxy with metallic flake. It turned out awesome (I did clear over the old formica that was painted black).

The torching was fun!!!!

I like how yours turned out. looks awesome. Makes me want to epoxy something on my boat!!! Especially since I have a ton of silver flake left over! LOL.

[mikenehrkorn]

How did you treat the underside of the platform or did you epoxy both sides?

[996scott]

yea i did both sides. I got it all done and will post some pictures