PDA

View Full Version : Ballast sensor 2019.


The_Robo_Fighter
03-28-2020, 08:27 AM
Is this the ballast sensor? If so is this as high as it adjusts? Thanks.https://uploads.tapatalk-cdn.com/20200328/f4dc08ab6814560ea7c081444700cefe.jpg

Sent from my SM-G960U using Tapatalk
bteeter
03-28-2020, 08:37 AM
That’s the overflow sensor. It cuts off the pumps automatically when the bags get too full.


Sent from my iPad using Tapatalk
haknslash
03-28-2020, 06:27 PM
Yes I believe that is the sensor.
Tabone
03-28-2020, 10:25 PM
I'm very jealous. I have a set of Wakemakers bags staring me down everyday. Just waiting for the boat to get out of quarantine.
Boonejeepin
03-29-2020, 08:02 PM
I am not an expert but that sensor just clips around the hose. You can move it as close to the vent as you would like if you have enough wire and a place for it.


Sent from my iPhone using Tapatalk
DanielHill
03-30-2020, 06:35 AM
I am not an expert but that sensor just clips around the hose. You can move it as close to the vent as you would like if you have enough wire and a place for it.


Sent from my iPhone using Tapatalk

you are right
dakota4ce
03-30-2020, 10:17 PM
you are right

It’s glued to a column of pipe too—you need to add some hose at the bottom of the pipe between it and the bag outlet in order to raise the whole column.

That’s how I did it. Easy peasy.


Sent from my iPhone using Tapatalk
Boonejeepin
03-30-2020, 11:57 PM
It’s glued to a column of pipe too—you need to add some hose at the bottom of the pipe between it and the bag outlet in order to raise the whole column.

That’s how I did it. Easy peasy.


Sent from my iPhone using Tapatalk

Interesting, I can see the pipe now that I look closer. The sensor is just clipped around the hose on my SE.


Sent from my iPhone using Tapatalk