SL garage clearance

[Isaguel]

This is for a 2020 SL. Guessing not much difference between 18, 19 and '20. Has anyone measured garage clearance if I were to unscrew the board racks. Just trying to see if it'll fit in a standard 8' garage if I were to unscrew the racks every time. I don't think its too much of a hassle. I believe the top of the windshield frame should be ok, but not sure if the uppermost edge of the folded tower would clear 8'. Anyone measure this?

[larry_arizona]

I can speak for an 18SA and my understanding is the SA and SL are identical heights.....

Folded FX1 tower down racks on is 8’5”, racks off 7’11”

I have to pull racks to fit in my barn, one bolt each to remove, very easy.

The high point with racks removed are the top horizontal piece of the tower.


Found SL measurements https://uploads.tapatalk-cdn.com/20200307/f41f2e3e8f1a64c431b5ad849722320c.jpg

Sent from my iPhone using Tapatalk

[Isaguel]

Great info. Thanks. That's saves me a couple grand in making the garage door entry higher. :D