View Full Version : Gear/Throttle Lever
03-07-2007, 07:32 PM
Here I am starting another thread with a question but where else can you get this quality feedback. My gear/throttle control seems to be hard to get into gear. Once it goes in it operates smoothly, just right at the beginning coming out of neutral. The selector on the transmission is also smooth and moves with ease. Can these be greased or is it in need of an adjustment? Anyone had this before?
03-07-2007, 10:24 PM
When I had this trouble it turned out to be a cable and when it was replaced it worked fine. Just my $0.02
03-08-2007, 10:57 AM
You can grease the ends that are exposed, extend the throttle one way, coat o grease, the other way , coat o grease, werk it a couple times. That may help. Also a small amt o grease on the connections and links.
Hope this helps
03-09-2007, 09:09 PM
I greased the ends up at the front like you said B. Works smooth as silk.
03-10-2007, 01:10 AM
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.