PDA

View Full Version : Boat Cover questions


Claydough3753
10-10-2019, 04:15 PM
I have a 2006 outback ls and my cover tore. looking for a new one but am unable to find one pre-made. I found one that is not made for one with a tower and found ones for the 2006 outback lsv. I keep it in my garage a lot of the time so I don't want to spend $1000 on a cover. does anyone know if a cover for a outback lsv will fit a ls? or if its possible to make a non tower cover work with my boat that has a tower? thanks
Stazi
10-10-2019, 04:17 PM
Yes, the LSV and LS are identical covers.


Sent from my iPad using Tapatalk
Claydough3753
10-10-2019, 04:52 PM
Okay so it doesn't matter inboard or stern drive. There both the same?
Stazi
10-10-2019, 04:59 PM
Correct. Makes no difference.


Sent from my iPhone using Tapatalk
Claydough3753
10-10-2019, 05:22 PM
Okay thanks for the info
VA LSV
10-11-2019, 06:24 PM
Westland makes one to fit your boat. I have a Westland for my LSV and it fits better than the factory cover that came with the boat.

https://www.boatcoversdirect.com/boat-covers/westland/application/4128/
Scottys
05-13-2020, 09:29 PM
Bought a 2007 Outback new, w/o tower, w/swim platform, came with an Attwood morning cover. Has performed well for 13 years. Need a replacement.
Contacted Atwood, no longer making new or replacement covers for Moombas.
Would like to find an OEM type replacement, that would include 3 pole pockets, draw string, and tie-downs.

VA LSV,
Could you provide a few more details regarding your cover? Material? Includes pole pockets and draw string?

Any and all suggestions would truly be appreciated.
VA LSV
05-14-2020, 09:06 AM
I went with shark skin plus and the cover is made with a draw rope and rope ratchets on both sides. Fits snug and no poles needed. Much easier to secure than the original Attwood that had to be tied at the rear.
Scottys
05-14-2020, 02:02 PM
Ok great!
Thanks for the help!
Scottys
05-15-2020, 01:54 PM
Ok one more question.
Went to the website. Tried to look up my boat. No listing for a 2007 Outback.
Shows a listing for a 2006. Are the hulls the same for these model years? Would a cover for a 2006 fit a 2007?
Looking up the specs on the Moomba website, they appear to be the same length and beam width.
Stazi
05-15-2020, 03:10 PM
Same hull


Sent from my iPhone using Tapatalk
Scottys
05-15-2020, 06:02 PM
Awesome Thanks!
Jason_Riggs
06-17-2022, 08:24 AM
Our 2002 Outback LSV with the gen 2 rad-a-cage tower and need to replace the cover. I cannot find a custom cover that says it fits our boat. If I remember correctly the 2002 Outback LSV and 2002 Mobius LSV are essentially the same boat correct? If our Outback LSV has the Gen 2 3 Leg Rad-A-Cage tower it is the exact same as the Mobius. If that is true I should be able to get a custom cover that is made to fit the 2002 Mobius LSV with Tower and swim platform, correct? Thanks for the help, don’t want to make a $600 mistake.
VA LSV
06-20-2022, 07:25 PM
According to the the 2002 owners manual in 2002 the Outback LSV didn't come with a tower while the Mobius LSV did. Other than that they are the same boat. I have been very pleased with Westland covers. I just got a new one this year for my 2005 LSV this year that fits my tower perfectly and also covers the swim platform. Looks like the 2002 and 2005 are the same hull.
https://www.moomba.com/wp-content/uploads/2021/08/2002-moomba-owner-manual.pdf