Wet sounds mounted to oz tower

[Mojo2.5dusty]

I’m seeing if anyone has mounted there wet sounds on to the holes for a rack on the top part of the OZ tower. If anyone knows what I’m talking about prob not best description.


Sent from my iPhone using Tapatalk

[MLA]

Looking to mount a tower pod to a board rack location?

[Mojo2.5dusty]

https://uploads.tapatalk-cdn.com/20190816/5499fc3c7f88b31fbdc79193807076d0.jpg
Yes the top rack spot. There are holes but I never use them and don’t need another rack.


Sent from my iPhone using Tapatalk

[MLA]

Id not want them down that low, if I could avoid it. Next, getting wire into the pod. You would have to convert the pod to the rear located 4-way speakon connector. Again, if rather not want that. Lets say the hole lined up, I bet you would need to use a spacer or the TC3-SBASE mounts so the pod cleared the tower. Worst case, you have to fabricate an adapter that bolted to the tower holes, then the pod bolted to the adapter.

[Mojo2.5dusty]

So I’m guessing nobody has tried it?!?


Sent from my iPhone using Tapatalk