PDA

View Full Version : What are the 2 small wires on the outside of the tower?



Surgical_ass
08-06-2019, 05:33 PM
Trying to figure out the wiring on the tower. The boat was not prewired for tower speakers but I do have wires that seem like they are for adding speakers attached to the rubber grommets.

There is a rubber grommet on the outside of the tower on each side on the bottom. It is attached to two small wires with what looks like a quick connector. It seems like it's too small to run speakers off of but I could be wrong what is it for?

Also, under the gunnel on the port side going to the amp there are two quick connects with wires that seem appropriate size for speakers. Is that what these are for?

Thanks!

gregski
08-07-2019, 10:45 AM
I'd guess the two small wires are for the all-around nav light.

Surgical_ass
08-08-2019, 04:22 PM
Makes sense that it might be a light wire just not sure why it's there and on both sides

gregski
08-08-2019, 06:53 PM
Oh yeah, it doesn't make sense that wires for the light would be on both side.

MLA
08-08-2019, 08:22 PM
IIRC, the anchor light uses gray and black color wires.

PuraVida
08-09-2019, 10:19 AM
https://uploads.tapatalk-cdn.com/20190809/ec358a637192cf43f87b39e6501a424e.jpg


Sent from my iPhone using Tapatalk

PuraVida
08-09-2019, 10:21 AM
I believe all port wiring is for speakers. You should have been pre-wired for 4 tower speakers.


Sent from my iPhone using Tapatalk