PDA

View Full Version : non skid flooring for bow



jimmsch
07-29-2019, 02:55 PM
So the snap in non skid section in the bow is falling apart. Is there any way I can get just the bow piece?

Thanks

z28ke
07-29-2019, 03:51 PM
So the snap in non skid section in the bow is falling apart. Is there any way I can get just the bow piece?

Thanks

I’ve been having bad luck with my snap-in nonskid as well. I’m going to upgrade to a complete gatorstep setup this winter.

To answer your question your moomba dealer should be able to get just the bow piece for you.

BrentC5Z
07-29-2019, 07:30 PM
Thinking of going all SeaDeck this winter and removing all the glued in carpet. A 40"x 80" sheet with adhesive backing is $150 in about any color and a few camo options.

You can also do the template route if so inclined.

jmf1125
08-03-2019, 08:08 PM
I have a similar issue with the snap in carpet in my Mojo 2.5. I searched online for something to correct the peeling and flaking of the rubber backing.
I found a spray on rubber backing that works great. First I brushed off all the loose stuff, the more the better. Spraying fresh rubber backing over dried out, flaking backing only creates more dried out flaking backing (I learned the hardway).Coat the back of the carpet well and I think you will be pleased.




Sent from my iPad using Tapatalk

jimmsch
08-04-2019, 08:32 PM
I have a similar issue with the snap in carpet in my Mojo 2.5. I searched online for something to correct the peeling and flaking of the rubber backing.
I found a spray on rubber backing that works great. First I brushed off all the loose stuff, the more the better. Spraying fresh rubber backing over dried out, flaking backing only creates more dried out flaking backing (I learned the hardway).Coat the back of the carpet well and I think you will be pleased.

Sent from my iPad using Tapatalk

can you send me the link please?

jimmsch
08-05-2019, 06:45 AM
The flooring isn't flaking, and I'm not sure the backing is even rubber. It seems like plastic. It is just completely separated from the flooring and there is a plastic membrane in between the flooring and the backing, kinda like saran wrap , but it doesn't show up in the pictures.

https://i.imgur.com/L3eeI9c.jpg

https://i.imgur.com/eUN4Q8V.jpg

https://i.imgur.com/NjzkPS3.jpg

This is now happening to the larger main floor area as well. The only piece that seems to be holding up, for now, is the captain's area.