PDA

View Full Version : Ballast problems



danfinley
06-20-2019, 06:57 PM
Hi, my 2012 Moomba outback v stock ballast system does not drain on one side. I can hear the pump working but not draining. I checked the wiring under the ballast switches located at the drivers seat everything looked good. The ballast reset switch located in the engine compartment wasn’t trigged however I triggered it and pulled the tab back to the reset position and it started to work and drain the ballast bag however half way through draining it stopped again. The ballast reset wasn’t triggered but I did the same thing as mentioned above and it drained the bag to empty. I am wondering if anyone knows how to fix this or what the issue may be.