PDA

View Full Version : 18 Mojo Ballast Sizes



2018MojoPro
12-07-2018, 11:56 AM
Can't find anywhere the breakdown of sizes in each area. I've got the factory belly hard tank, bow bag, and rear locker bags. Anyone know what they are? I'm considering WM upgrade to the dual 1270's, but is it really worth it for $1,000?

RC_Hinojosa
12-07-2018, 12:17 PM
Can't find anywhere the breakdown of sizes in each area. I've got the factory belly hard tank, bow bag, and rear locker bags. Anyone know what they are? I'm considering WM upgrade to the dual 1270's, but is it really worth it for $1,000?

The factory rear bags are 900s, the belly hard tank is 700 and the IBS is 500 for a total of 3,000 lbs factory.

I can't tell you if the WM 1270s are worth a $1,000 for the little bit of storage you'd retain over Enzo 1450s you can get for about $700.

Keep in mind that you are gonna want some more bow weight after upgrading the rears to keep your pitch down and Autowake from dumping your bags to achieve pitch.

I did Enzos and 500lbs of lead I keep completely hidden under the bow cushion and it's been phenomenal.

ATS0921
12-07-2018, 02:20 PM
The factory rear bags are 900s, the belly hard tank is 700 and the IBS is 500 for a total of 3,000 lbs factory.

I can't tell you if the WM 1270s are worth a $1,000 for the little bit of storage you'd retain over Enzo 1450s you can get for about $700.

Keep in mind that you are gonna want some more bow weight after upgrading the rears to keep your pitch down and Autowake from dumping your bags to achieve pitch.

I did Enzos and 500lbs of lead I keep completely hidden under the bow cushion and it's been phenomenal.How big is your crew typically with this setup?

Sent from my SM-G965U1 using Tapatalk

RC_Hinojosa
12-07-2018, 02:30 PM
How big is your crew typically with this setup?

Sent from my SM-G965U1 using TapatalkTypically 4 or 5.

On the days we're rolling 8+ it's a monster [emoji305]

Sent from my Note9 using Tapatalk

2018MojoPro
12-08-2018, 10:33 AM
Thanks RC! Thats the route Iím going then, Enzos, assuming they fit properly in my Ď18 Mojo. At WakeMakers when I enter my bot model, the Enzoís donít show up. My crew is typically 4-6 at most, and right now I have the opposite problem, not enough rear weight so front bags wont fill to get pitch. I added 500lbs of lead, almost went 1,000 but Iíd rather do bags to dump the weight and not trailer it.

RC_Hinojosa
12-08-2018, 01:28 PM
Thanks RC! Thats the route Iím going then, Enzos, assuming they fit properly in my Ď18 Mojo. At WakeMakers when I enter my bot model, the Enzoís donít show up. My crew is typically 4-6 at most, and right now I have the opposite problem, not enough rear weight so front bags wont fill to get pitch. I added 500lbs of lead, almost went 1,000 but Iíd rather do bags to dump the weight and not trailer it.

They will fit your Mojo perfectly unless you have a heater. The guys that have heaters fold the heater-side leg a bit.

The guys that gripe that Enzos eat all your storage space I feel are just packing too much shit to begin with. Between my over-engine storage tray and my observer compartment I have plenty room for docking/anchorage gear/jackets, etc.

https://www.wakemakers.com/fly-high-enzo-surf-sac.html

You kinda missed the mark on the black Friday sale but there is a forum discount. They may run something right before Christmas, might wanna monitor the site or you can order directly from FatSac by phone.

You'll also need your vent plugs, quick-connects and I'd reccomend a heat gun to ease the hose off and on the fittings.

Sent from my Note9 using Tapatalk

2018MojoPro
12-08-2018, 01:36 PM
Crap, I do have the heater option. So its either fold that leg, or see if the 1270's fit with the heater option. So the bag hardware just transfers over to the new bags?

RC_Hinojosa
12-08-2018, 01:45 PM
Crap, I do have the heater option. So its either fold that leg, or see if the 1270's fit with the heater option. So the bag hardware just transfers over to the new bags?The 1270s are the new laser-scanned exact fit bags from WMs, I'd assume they fit with the heater but no harm in calling WM to verify.

You could transfer the existing hardware, most just get new hardware and sell their 900s plug n play.



Sent from my Note9 using Tapatalk

2018MojoPro
01-26-2019, 12:04 PM
That feeling when boxes from WM show up. Also adding another 10x50lb bags of lead to the 10 already in

2018MojoPro
01-26-2019, 12:47 PM
http://www.mediapeeps.com/images/forums/IMG_0121.jpg

http://www.mediapeeps.com/images/forums/IMG_0123.jpg