PDA

View Full Version : Mojo engine tray



schwan
10-22-2018, 05:59 PM
I saw at some point someone posted that they had skier's choice make an over the engine tray that will fit a mojo, a lot like what the max has, only not as deep, but I can't find that thread as hard as I search, anyone remember where that was? I think they even listed the part number with it, thanks in advance!

RC_Hinojosa
10-22-2018, 06:16 PM
I saw at some point someone posted that they had skier's choice make an over the engine tray that will fit a mojo, a lot like what the max has, only not as deep, but I can't find that thread as hard as I search, anyone remember where that was? I think they even listed the part number with it, thanks in advance!

Here you go bro : This is the part # 119402

Sent from my SAMSUNG-SM-G935A using Tapatalk

schwan
10-22-2018, 06:42 PM
Awesome, thanks!

Sent from my SM-G950U using Tapatalk

rdlangston13
10-24-2018, 04:22 AM
https://uploads.tapatalk-cdn.com/20181024/4def99cfaab819044e7273489630528d.jpg

It can actually hold a lot of stuff too. We have a small box anchor, shore spike, 100ft anchor line, 50 ft anchor line, anchor buddy bungee docking line, wakeboard rope and handle, surf rope, 4 12ft docking lines, 6 bungee docking lines, and a tsunami pump in ours


Sent from my iPhone using Tapatalk

schwan
10-24-2018, 10:35 AM
Nice, I just bought a 2016 mojo, and my wife is mad that I'm going to fill all the storage with ballast, this should help

Sent from my SM-G950U using Tapatalk

moparsigfan
10-24-2018, 11:25 AM
Any idea if this part number will fit a Craz also?


Sent from my iPhone using Tapatalk

schwan
10-24-2018, 12:00 PM
RC said in the Sept 2018 pic thread that it will fit mojo and craz, if you search the part number you can find what he wrote

Sent from my SM-G950U using Tapatalk

RC_Hinojosa
10-24-2018, 12:19 PM
Any idea if this part number will fit a Craz also?


Sent from my iPhone using Tapatalk

Yeah, it fit's a Craz...same engine bay opening as Mojo

Stazi
10-24-2018, 01:46 PM
What are these going for price wise?

RC_Hinojosa
10-24-2018, 02:06 PM
What are these going for price wise?

I got mine at my dealer for $200.

Stazi
10-24-2018, 02:15 PM
I got mine at my dealer for $200.

Thanks....not exactly cheap


Sent from my iPad using Tapatalk

RC_Hinojosa
10-24-2018, 02:17 PM
Thanks....not exactly cheap


Sent from my iPad using TapatalkYou could make one on the cheap, Trayson and others have done so...

To me time is money and I'd rather spend it with my 9 month old, then spend hours building it myself.

Sent from my SM-N960U using Tapatalk

moparsigfan
10-24-2018, 02:27 PM
You could make one on the cheap, Trayson and others have done so...

To me time is money and I'd rather spend it with my 9 month old, then spend hours building it myself.

Sent from my SM-N960U using Tapatalk

Time is our most precious commodity!
This is going on my wishlist for next spring. The list is getting pretty long though!


Sent from my iPhone using Tapatalk

Edo88
10-24-2018, 03:26 PM
I bought one for my mojo love it just had to modify on the 15 since the rod is in a different location https://uploads.tapatalk-cdn.com/20181024/afe1fd06a15821c5298cfde6f95ce0ff.jpg


Sent from my iPhone using Tapatalk

flynnva
10-24-2018, 05:43 PM
Nice, I just bought a 2016 mojo, and my wife is mad that I'm going to fill all the storage with ballast, this should help

If you get the Mojo 1270lb bags from Wakemakers you actually keep a bit of storage toward the front of the bench seats. I keep a four pack of life vest on the starboard side and all my tow ropes and misc. stuff on the port side. The Enzo bags that others use hold 180lbs more each but you do loose all the storage. The Mojo bag part # is 42101.
Congrats on the Mojo, we love ours.

larry_arizona
10-24-2018, 06:39 PM
Can you guys take a length and width measurement on this tray?


Sent from my iPhone using Tapatalk

BrettLee3232
10-25-2018, 06:53 PM
Damn, I missed the boat on this one. Glad they finally listened to everyone. Anyone got a part number for a Mondo? [emoji23]


Sent from my iPhone using Tapatalk

rdlangston13
10-25-2018, 07:18 PM
Damn, I missed the boat on this one. Glad they finally listened to everyone. Anyone got a part number for a Mondo? [emoji23]


Sent from my iPhone using Tapatalk

As far as I know it’s only compatible to with the craz and 2nd generation Mojos


Sent from my iPhone using Tapatalk

larry_arizona
10-25-2018, 08:56 PM
Measurements of craz/mojo tray please? Anyone? Bueller? [emoji23]


Sent from my iPhone using Tapatalk

Edo88
10-25-2018, 09:13 PM
Sorry boats tucked in storage I’ll head out there on Sunday and if no one posts the measurements by then I will try to


Sent from my iPhone using Tapatalk

larry_arizona
10-25-2018, 09:45 PM
Sorry boats tucked in storage I’ll head out there on Sunday and if no one posts the measurements by then I will try to


Sent from my iPhone using Tapatalk

I don’t want you to go out of your way and make a special trip. I will be patient and hope for someone who might have it in the garage.

Much appreciated though.


Sent from my iPhone using Tapatalk

Edo88
10-25-2018, 10:30 PM
Nah it’s fine I still need to finish modifying it. That picture is exactly how I left it lol


Sent from my iPhone using Tapatalk

RC_Hinojosa
10-25-2018, 10:45 PM
Measurements of craz/mojo tray please? Anyone? Bueller? [emoji23]


Sent from my iPhone using TapatalkI'm grabbing my boat tomorrow to hit the lake on Saturday, I'll get you the dimensions

Sent from my Note9 using Tapatalk

larry_arizona
10-26-2018, 06:37 AM
Thanks Edo and RC!!


Sent from my iPhone using Tapatalk

RC_Hinojosa
10-26-2018, 08:25 PM
Measurements of craz/mojo tray please? Anyone? Bueller? [emoji23]


Sent from my iPhone using Tapatalk27"W x 35"L x 4.5"D

Flange is 1.5" all the way around the tray.

Sent from my Note9 using Tapatalk

larry_arizona
10-27-2018, 07:06 AM
27"W x 35"L x 4.5"D

Flange is 1.5" all the way around the tray.

Sent from my Note9 using Tapatalk

Thank you sir!!!!!


Sent from my iPhone using Tapatalk

larry_arizona
10-27-2018, 08:32 AM
27"W x 35"L x 4.5"D

Flange is 1.5" all the way around the tray.

Sent from my Note9 using Tapatalk

Does the 27”x35” include the 1.5” flange?


Sent from my iPhone using Tapatalk

RC_Hinojosa
10-27-2018, 08:35 AM
Does the 27”x35” include the 1.5” flange?


Sent from my iPhone using TapatalkSorry for not clarifying, the 27" x 35" are the interior tray dimensions, not accounting for the perimeter flange.

Sent from my Note9 using Tapatalk

Edo88
10-27-2018, 10:55 AM
You should probably measure the opening for the engine bay as well that’ll give him a better idea he could compare it too his Supra


Sent from my iPhone using Tapatalk

larry_arizona
10-27-2018, 11:22 AM
You should probably measure the opening for the engine bay as well that’ll give him a better idea he could compare it too his Supra


Sent from my iPhone using Tapatalk

Not even going to be close, the SA opening is 31”wide 29”long

34”x 32” tray including 1.5” perimeter lip would be ideal.

Notching out the lift hinge area is not difficult.

I need to wait for the boat show to measure the Supra/moomba and other OEM trays out there to see if any are close.


Sent from my iPhone using Tapatalk

Dystinct
06-29-2019, 06:24 PM
I purchased a tray from the dealer that fits the 2019 Mojo. I'll post pictures of it when it comes in.

BigOrange
06-29-2019, 08:37 PM
The question is then, which tray (part number) did you order?

RC_Hinojosa
06-30-2019, 09:55 AM
The question is then, which tray (part number) did you order?I don't have the number but you might find it searching the forum. It fits Craz & Mojo.

Sent from my Note9 using Tapatalk

Edo88
06-30-2019, 07:34 PM
The part number is in the second post of this topic


Sent from my iPhone using Tapatalk

snyderaaron
08-09-2019, 10:21 PM
Does anyone have a good dealer to buy from? Mine won't get back to me?

rdlangston13
08-10-2019, 06:45 AM
Does anyone have a good dealer to buy from? Mine won't get back to me?

Try Rinkers Boat World in Houston, TX.