PDA

View Full Version : 2019 Moomba Site/Colorizer is Live!



Mobius22
10-03-2018, 08:19 AM
Just a heads up that 2019 is live across the site.

padge
10-03-2018, 09:41 AM
Sweet!


Sent from my iPhone using Tapatalk

padge
10-03-2018, 09:45 AM
Got mine built lol
https://uploads.tapatalk-cdn.com/20181003/75707d177c9e9a0da64f08510a3a2b5d.jpg


Sent from my iPhone using Tapatalk

larry_arizona
10-03-2018, 10:15 AM
Built a Makai for fun. Nice boat!!!!




Sent from my iPhone using Tapatalk

Prospersigman
10-03-2018, 10:26 AM
I built one for s--ts and giggles and it was $113,000...I'll stick with my 2018 SL550 for that sort of money.

dakota4ce
10-03-2018, 10:30 AM
Build out a 2019 SL550 and tell us the price you get. $155+?

Also, if you put a 575 in it, itís a waste, unless youíre in the mountains. The 460 is incredible.


Sent from my iPhone using Tapatalk

padge
10-03-2018, 10:31 AM
One I built was only 97000, and clicked a lot of options. But I only need a 400


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 10:33 AM
One I built was only 97000, and clicked a lot of options. But I only need a 400


Sent from my iPhone using Tapatalk

I would say you are both motor upgrades away from his price, basically. Sounds about right...

I think theyíre selling around 100-105 so far arenít they?


Sent from my iPhone using Tapatalk

padge
10-03-2018, 10:38 AM
From what Iíve seen. Msrp anyway. The 400 will be plenty for where Iím located with the right prop. I believe one can be bought under 90k real money


Sent from my iPhone using Tapatalk

padge
10-03-2018, 10:40 AM
From what Iíve seen. Msrp anyway. The 400 will be plenty for where Iím located with the right prop. I believe one can be bought under 90k real money


Sent from my iPhone using Tapatalk

Sorry msrp is a hair over 101k. Still think around 90k would buy one


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 10:41 AM
Under 90 for a 400Ėthatís gotta be a screaming deal. With hardly any out there I would think thatís pretty rare at least this early?

The 460 is amazing. I would not discount how good it is. Unreal. The combo of reduction and the power is far beyond how good I thought it would be.

And this hog craves WEIGHT.


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 10:43 AM
Stock full plus 4 guys and 2100# leadósurfed at 3400 rpm [emoji33][emoji33][emoji33].

Yes 2100# lead 🤣


Sent from my iPhone using Tapatalk

padge
10-03-2018, 10:46 AM
Stock full plus 4 guys and 2100# leadósurfed at 3400 rpm [emoji33][emoji33][emoji33].

Yes 2100# lead 🤣


Sent from my iPhone using Tapatalk

Letís see the wave


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 10:48 AM
I posted a video on the Facebook on his page several times. Posting video on here sucks!

I can probably find more later I know thatís not a good one. But Iím a big dude: 6-4.

The wave is sick, and itís not even close to done yet.

https://uploads.tapatalk-cdn.com/20181003/df47e4bda761ebca96ece295e8b49ccf.jpg


Sent from my iPhone using Tapatalk

padge
10-03-2018, 10:50 AM
I posted a video on the Facebook on his page several times. Posting video on here sucks!

I can probably find more later I know thatís not a good one. But Iím a big dude: 6-4.

The wave is sick, and itís not even close to done yet.

https://uploads.tapatalk-cdn.com/20181003/df47e4bda761ebca96ece295e8b49ccf.jpg


Sent from my iPhone using Tapatalk

Looks nice. I donít have Facebook!!! Lol
https://uploads.tapatalk-cdn.com/20181003/cdd9c0951ce3da8274743d05725d741e.png
This is my 247 with about 5200#


Sent from my iPhone using Tapatalk

Prospersigman
10-03-2018, 10:52 AM
Build out a 2019 SL550 and tell us the price you get. $155+?

Also, if you put a 575 in it, itís a waste, unless youíre in the mountains. The 460 is incredible.


Sent from my iPhone using Tapatalk

How is the 575 ever a waste? Waste maybe a little harsh...drive a boat with the 575 in it and tell me its a waste.

padge
10-03-2018, 10:54 AM
I think itís a waste on the Moomba. Mainly because itís not gonna resale the same. I think youíll retrieve similar amount than even a 400 boat. And if you can do the same with less itís always better. 575 will use a lot more fuel as well


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 10:56 AM
You need to run a 460 with the reduction transmission. Itís a mind blow.

I regularly run an SL550 as well.

So I am not unfamiliar at all.


Sent from my iPhone using Tapatalk

dakota4ce
10-03-2018, 11:02 AM
How is the 575 ever a waste? Waste maybe a little harsh...drive a boat with the 575 in it and tell me its a waste.

On this boat, UNLESS youíre a mountain man, itís very unnecessary in order to max this boat. My opinion. I own one.


Sent from my iPhone using Tapatalk

korey
10-03-2018, 11:19 AM
Got mine built lol
https://uploads.tapatalk-cdn.com/20181003/75707d177c9e9a0da64f08510a3a2b5d.jpg


Sent from my iPhone using Tapatalk

Basically the same thing i built but with Ultra blue flake. I told the lady she gets to pick colors this year. i still get veto powers though. She like teal and murdered out stuff, so hopefully she builds this:
https://crm.skierschoice.com/api/products/img?product_id=31&angle=three_quarter_front&options=7728,7739,7088,7089,7099,7109,7119,7120,78 00,7127,7139,7147,7790,7161,7774,7162,7170,7766,77 64&transparent=0&width=1280&color=dddddd

padge
10-03-2018, 11:20 AM
https://uploads.tapatalk-cdn.com/20181003/f652681667934f5f9a30b37b0cf77fff.jpg thatís the interior I liked


Sent from my iPhone using Tapatalk

korey
10-03-2018, 11:24 AM
i dig that!

This years colorizer gets more details than last.

Also, I built my exact 2018 build (Craz) and there is about a $6k MSRP increase.

Shoebox
10-03-2018, 12:40 PM
Under 90 for a 400Ėthatís gotta be a screaming deal. With hardly any out there I would think thatís pretty rare at least this early?

The 460 is amazing. I would not discount how good it is. Unreal. The combo of reduction and the power is far beyond how good I thought it would be.

And this hog craves WEIGHT.


Sent from my iPhone using TapatalkWhich prop?

dakota4ce
10-03-2018, 12:58 PM
I switched out the factory 15.5Ēónow running 16x16.25 OJ. I actually think I could use a little more length even, but this one is quite good.


Sent from my iPhone using Tapatalk

Charlie99
10-03-2018, 02:33 PM
I switched out the factory 15.5”—now running 16x16.25 OJ. I actually think I could use a little more length even, but this one is quite good.


Sent from my iPhone using Tapatalk

Did they change prop shaft angles, prop shaft size to fit a larger prop?

dakota4ce
10-03-2018, 02:39 PM
Unknown. The 16 clears by 5/8, which is 1/8 less than what most OEMs would consider ďenough.Ē But in 15 hrs or so of big weight I see nothing thus far. Not that minor burn would concern me tremendously.


Sent from my iPhone using Tapatalk

Charlie99
10-03-2018, 02:48 PM
Unknown. The 16 clears by 5/8, which is 1/8 less than what most OEMs would consider “enough.” But in 15 hrs or so of big weight I see nothing thus far. Not that minor burn would concern me tremendously.


Sent from my iPhone using Tapatalk

Very nice I'm looking to increase prop size on my SE to be a bit more efficient, I think the 15x14.25 is a little over kill for the 550

dakota4ce
10-03-2018, 11:16 PM
Looks nice. I donít have Facebook!!! Lol
https://uploads.tapatalk-cdn.com/20181003/cdd9c0951ce3da8274743d05725d741e.png
This is my 247 with about 5200#


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20181004/c7620ae3cc536829cbac7525c9460da3.jpg

Here is some Makai. I usually make waves look dinky but this one holds its own. I think thatís 5700#....or so. Motor purrs along with that weight. Itís bananas.



Sent from my iPhone using Tapatalk

padge
10-04-2018, 08:40 AM
https://uploads.tapatalk-cdn.com/20181004/c7620ae3cc536829cbac7525c9460da3.jpg

Here is some Makai. I usually make waves look dinky but this one holds its own. I think thatís 5700#....or so. Motor purrs along with that weight. Itís bananas.



Sent from my iPhone using Tapatalk

Yours still may have a little bit of thickness on mine. But my boat throws down for sure. Just takes a lot longer to setup haha. But Iím getting a new boat in the spring
https://uploads.tapatalk-cdn.com/20181004/ade3755a2c2ba58bf5a4f9c2393ed14f.png


Sent from my iPhone using Tapatalk

csm
10-04-2018, 11:55 AM
Got my order in for an October build of a Max... Time to start planning ballast upgrades.
27738
27739

dakota4ce
10-04-2018, 02:48 PM
Yours still may have a little bit of thickness on mine. But my boat throws down for sure. Just takes a lot longer to setup haha. But Iím getting a new boat in the spring
https://uploads.tapatalk-cdn.com/20181004/ade3755a2c2ba58bf5a4f9c2393ed14f.png


Sent from my iPhone using Tapatalk

Not sure what thickness means. Itís impossible to compare waves based on pictures. All I know is I had my SE 450 set up to be a little bit heavier than Robert Garcia had his set up. It was insane. And this boat is very nearly the same as that, with a way better motor, more room, nicer shape, and a lot more storage.

As a 225 pound gentlemen, riding on a 4í8Ē board, if a wave doesnít pack the sauce I can tell immediately.


Sent from my iPhone using Tapatalk

dakota4ce
10-04-2018, 02:52 PM
Got my order in for an October build of a Max... Time to start planning ballast upgrades.
27738
27739

Boat is gonna rip! ❤️❤️


Sent from my iPhone using Tapatalk

padge
10-04-2018, 02:54 PM
Not sure what thickness means. Itís impossible to compare waves based on pictures. All I know is I had my SE 450 set up to be a little bit heavier than Robert Garcia had his set up. It was insane. And this boat is very nearly the same as that, with a way better motor, more room, nicer shape, and a lot more storage.

As a 225 pound gentlemen, riding on a 4í8Ē board, if a wave doesnít pack the sauce I can tell immediately.


Sent from my iPhone using Tapatalk

Just meaning your wave has a more meatier look to it. Maybe just the difference in shape compared to a malibu. I know what you mean about being able to tell. If it doesnít cramp your calves up, it doesnít have enough push! Hahaha


Sent from my iPhone using Tapatalk

dakota4ce
10-04-2018, 04:00 PM
For all of you building Makai boats and have interest, here are some wave pics. Also, basically an entire family in the bow. HUGE.

2774027741277422774327744

ddthomason
10-04-2018, 04:39 PM
27745
2019 Moomba Makai

That Guy
10-04-2018, 05:01 PM
Got my order in for an October build of a Max... Time to start planning ballast upgrades.
27738
27739

Looks great! Did they change the gel lines on the bow? Looks like it from picture but wasnít sure if that was real life. If so thatís great!

ddthomason
10-05-2018, 02:40 PM
27748277492775027748

Prospersigman
10-05-2018, 04:23 PM
This is the best looking Makai I have seen...hands down!! I am just not a fan of the gel lines and how forward the MOOMBA lettering is, but this hides it.

You ordering this one, if so I cannot wait to see real live pictures of it.

Stazi
10-06-2018, 10:38 AM
As an owner of a half black Craz, I would SERIOUSLY reconsider that color if you are in hard water. Black is a BITCH for water spots, and yes I have used Boat Bling and now Chemical Guys water spot remover and sure it looks good after you wipe it down...but 5 minutes after going back on the water it looks like crap again. In theory black gel coat looks awesome, but unless you wanna detail your boat after every session I say skip it.....


Sent from my iPad using Tapatalk

larry_arizona
10-06-2018, 11:08 AM
Metallic black is much friendlier at hiding spots if that is an option.

But agree black is a bitch but looks the best when clean


Sent from my iPhone using Tapatalk

Jeepers
10-06-2018, 05:09 PM
I have pure black LSV and love it! Sits in hard water lake from April to the end of Sept. it is a little more work. However, I started using Rejex and its no problem at all. Water spots wipe right off with a microfiber cloth dipped in lake water, the scum line wipes off with a wet rag. Works all summer, better than any wax I have tried and itís cheap! Look it up on amazon and make sure to follow the instructions.

Just know; black is hot and little scratches and dings show up easier than metallics or whites. Just invest in a dual action polisher, some foam pads. Scratches and scuffs are easy to polish out with a DA polisher and it wonít leave swirl marks. Deeper defects are easily removed with 800-1000 grit wet sanding followed up by a good polishing.

If you want black, go for it!!!


Sent from my iPhone using Tapatalk Pro

Jeepers
10-06-2018, 05:11 PM
https://uploads.tapatalk-cdn.com/20181006/3a790d521aff84c5be9bab2f4283dbd2.png


Sent from my iPhone using Tapatalk Pro

996scott
10-07-2018, 03:04 PM
Jeepers, thanks for the recommendation, i just bought some to try out on my all black boat as well. Black is a pain but it looks great when clean,

Jeepers
10-10-2018, 11:29 PM
Couldnít agree more!

Black Moomba LSV
Black Toyota Sequoia
Black Ram 1500

Stuff work great on vehicles as well.


Sent from my iPhone using Tapatalk Pro

jason1973
10-11-2018, 02:35 PM
2776527766

Just placed the order. I can't wait. First moomba, coming from a mastercraft x2

oh and BTW, my X2 was all black,, it was not hard to take care of.. not at all. Water spots were no problem. Just kept the boat waxed and used Protec water spot remover and polisher and they were gone. Nothing on the water beats a black boat for looks.

There are 6 wake boats on my lake and everyone of them is mostly black.

Broke Pilot
10-11-2018, 04:21 PM
Congrats on the order! That thing looks great, love the orange accents inside!