Changing speakers in boat

[Kidder522]

Hey Everyone.

I’m not really a audio repair guy, but how hard is it to replace the 6 in boat speakers as a dyi? I have some new kickers in a box that were set to go in my old boat, so I was thinking about putting them in the LSV. I think I have a few speakers that are a touch worn out.

As always, any insight is always very appreciated.

Richard.


Sent from my iPhone using Tapatalk

[MLA]

At a minimum, you will need to cut back the leads and crimp on new terminals and drill new screw holes. At the max, you will need to enlarge the moutning hole.

[Kidder522]

Sorry. Should have put this in the audio section.


Sent from my iPhone using Tapatalk