prop needed for LSV

[thorne615]

wanted prop 14.125 x 14 OJ# 466 for 2008 Moomba LSV

[Sp8]

wanted prop 14.125 x 14 OJ# 466 for 2008 Moomba LSV

Think I still have this from my 2011 LSV. Think it is the same Hull, but not sure.

https://uploads.tapatalk-cdn.com/20180723/c410569cd08231d58b43a3c18541572a.jpghttps://uploads.tapatalk-cdn.com/20180723/ba4c4ed564478bf4a4a15febc3e2bbca.jpg


Sent from my iPhone using Tapatalk

[Jeepers]

I’d either go Acme 2315 which is what I run on my 08 or the Acme 1847.



Sent from my iPad using Tapatalk

[twkoehn]

+1 for the Acme 1847. I put one on my 07 LSV and would not go back.

[thorne615]

Thanks for the info, had a bad experience with my trailer a couple weeks a go.
27378

[dusty2221]

I have a prop at home from my Supra, I'll see which one it is when I get home. We carried it as a spare after getting a different one.

Sent from my SM-G960U using Tapatalk

[Jeepers]

Thanks for the info, had a bad experience with my trailer a couple weeks a go.
27378

Yikes!! That can easily be fixed though.


Sent from my iPad using Tapatalk

[Jeepers]

Just know; with the 2315 you will loose a lot of top end! We are on a small lake and primarily surf so the low end torque was our primary focus. With the the 2315 the WOT rpms are perfect fully weighted 3800#’s. However, my top end is only 33mph empty with just me and trimmed out.

The 1847 was an awesome prop! Did a good job surfing, wake boarding, skiing and tubing. Top end was right around 38mph. I would say it’s the best all around prop for the LSV!


Sent from my iPad using Tapatalk

[twkoehn]

We topped out at about 39 MPH with the stock prop. When we upgraded to the Acme 1847 we only lost 1 MPH but gained a lot of low end torque. Like Jeepers said, the 1847 is a very good all around prop

[Jeepers]

Just checking back in to see if you pulled a trigger on a new prop? Let us know what you end up with and how it’s working for you!


Sent from my iPhone using Tapatalk Pro