Rack Suggestoins for a 2003 Mobius?

[bkearney]

We have a 2003 with the stock Rad a Cage tower. I just got a new board which will not fit in the compartments, so I need to get it up on the racks. Any suggestions on a good setup. Ideally, we would do 5 (2 surf, three wakeboards). I have seen some suggestions for the Krypt racks, but I can not find anything which will fit the veritcal oval bars.

Thanks in advance!

-- bk

[SpitzerCR]

I went with bullet lines but not digging where I have to put them. It’s really high to get the angle reasonable front to back due to the swoop of the circular tubing of the cage .

[bkearney]

I went with bullet lines but not digging where I have to put them. It’s really high to get the angle reasonable front to back due to the swoop of the circular tubing of the cage .Would u mind posting photos?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Darter]

Not a great shot, but here's how our bullet lines/indy flat bimini is set up. For the price, we love it. https://uploads.tapatalk-cdn.com/20180701/5e7a049a1179dfacfba8be383f837a5d.jpg

Sent from my OnePlus 5 using Tapatalk

[Darter]

Here's a close up of the back mount.
https://uploads.tapatalk-cdn.com/20180701/e2ccfac95653cd80fc09038e51a3be41.jpg

Sent from my OnePlus 5 using Tapatalk

[jcarter20]

I had an 05 Supra 22 SSV with a Rad a Cage tower. I assume it is similar to yours. Roswell were the stock tines and I added ski racks above them. They are expensive, but worked really well. You can buy swivel mounts, which I would recommend. I had the racks for a surf board on top and Wakeboard on the bottom. You can put a Wakeboard in the surfboard slot if you need too.

https://uploads.tapatalk-cdn.com/20180701/113d33419e99b8f699186e923d5c7e9c.jpg


Sent from my iPhone using Tapatalk

[bkearney]

Thanks for sharing. THis photo seems to show newer tines that fit the crossbar. Where did those come from?

[jcarter20]

Thanks for sharing. THis photo seems to show newer tines that fit the crossbar. Where did those come from?

The surf and Wakeboard tines just bolted directly to the Supra plate that came on the boat. There was already a swivel mount there also. I am guessing you don’t have either of those. However you can buy the universal mount, swivel, and then the surf caddy to mount on your tower. This picture might be better. And below is the link to their website.
https://www.roswellmarine.com/product-category/roswell-board-rack-and-accessories/board-racks/
https://uploads.tapatalk-cdn.com/20180702/e91967aaf2675537089cfecf2bd26cd8.jpg


Sent from my iPhone using Tapatalk

[bkearney]

Thanks.. I will take a look at those and see if I want to spend the money :)

[Darter]

If you want to go the cargo bar route, I found more pictures that show them on the bimini... 2729927300

Sent from my OnePlus 5 using Tapatalk