Wiring lights to 2015 SA tower / Looking for tower wiring diagram

[kristrujillo]

I am looking for the wiring diagram for the tower of a 2015 SA. I found the post with the Moomba tower diagram which seems very close. I am setting out to add a pair of Monster LEDs to my tower. I am finding the pre-drilled/pre-wired plugs in my tower only have a single red wire vs the Aviator diagram gives me the idea I should see four wires when I pull out the plug in the tower.

Anyone installed lights on their tower?

Here's the diagram Aviator diagram I am referencing https://forum.moomba.com/showthread.php?29072-Aviator-3-Tower-Wiring-Diagram&highlight=tower+wiring

[mor3naz0]

I would be interested in the same thing.
What brand model is the tower on the 2015 SA?
Rose well Aviator?


Sent from my iPhone using Tapatalk

[kristrujillo]

What brand model is the tower on the 2015 SA?
Rose well Aviator?


Yes I believe so from what I can tell. The wiring isn't identical to the diagram I referenced above but very close. My LEDs will be here today so I will start digging in! I couldn't find anyone to do it for a few weeks and need these next week for Lake Powell so it's gonna become a DIY job.

[kristrujillo]

Ok I was wrong. The wiring in the 2015 SA matches the Aviator diagram. I found there were two additional wires (red and white) that were also ran but ended below the base of the tower. Install went very smooth and the lights look great! Can’t wait to try them out next week.

https://uploads.tapatalk-cdn.com/20180628/88347e7a671a38e7df32be609f615494.jpg


Sent from my iPhone using Tapatalk