PDA

View Full Version : Craz and acme 2315



parrothd
06-23-2018, 09:04 PM
I don't remember who was asking about acme 2315 vs oj 945. With full enzos, 750 ibs, center tank and 500 lbs of lead and just driver I'm pretty quick to plane. I didn't try with auto launch but it got on plain pretty quick. 10-20 seconds?

The oj 945 is my spare prop now.. :)

DFTR Josh
06-24-2018, 12:37 PM
The 15x12 is an amazing prop and still keeps your rpm's in check. Let's hope it's a factory option for 2019...

mcjimmy33
06-24-2018, 08:19 PM
I got a 2313 and I can still hit 38mph at wot


Sent from my iPad using Tapatalk

rdlangston13
06-24-2018, 11:01 PM
I got a 2313 and I can still hit 38mph at wot


Sent from my iPad using Tapatalk

Is that 5,000 or 5,200
rpm?


Sent from my iPhone using Tapatalk

mcjimmy33
06-25-2018, 07:00 AM
I can’t recall. I remember getting the manual out at the time and was below the max rpm. I’ll check next time I am out if I am not loaded down with people.


Sent from my iPhone using Tapatalk

rdlangston13
06-25-2018, 09:37 AM
I can’t recall. I remember getting the manual out at the time and was below the max rpm. I’ll check next time I am out if I am not loaded down with people.


Sent from my iPhone using Tapatalk

I think the manual says 5,000-5,200 lol. I’ve never taken it past 5,000


Sent from my iPhone using Tapatalk

mcjimmy33
06-25-2018, 09:56 AM
Page B-1 in the manual has it at 5000-5400. I have only ever tested 5k when I wanted to see the top speed, I normally cruise at 25 mph


Sent from my iPhone using Tapatalk