Tower Tube Sizes

[Hyperryd]

Hey what diameter tubes are used on the Moomba towers? Are they all the same size or are there different sizes? I'm working on a project that I am hoping will work for the Moomba towers, but I don't have access to a dealer around me. I am mainly looking to the cross tubes overhead. If anybody can take a caliper to theirs and post their model of boat and the result I would appreciate it?

[Shoebox]

Which years?

[Stazi]

Which years?

Exactly. There are several versions of tower. Which year and model is your particular boat?


Sent from my iPhone using Tapatalk

[Hyperryd]

I’m not looking for my boat. I am trying to find out what clamp sizes I would need to fit the most boats. If you know your size , can you post it with the year and model. A pic of the tower with the specs would be awesome too.

[kaneboats]

I think he's working on a "project" for multiple towers. I wanna say the older LSV tower (XTP one from 2006-2010 or so) was 2 3/8" (2.38"). The ones before that were smaller.

[Shoebox]

I’m not looking for my boat. I am trying to find out what clamp sizes I would need to fit the most boats. If you know your size , can you post it with the year and model. A pic of the tower with the specs would be awesome too.I'll check my 2014 Mondo with Oz tower later today.

[RC_Hinojosa]

I’m not looking for my boat. I am trying to find out what clamp sizes I would need to fit the most boats. If you know your size , can you post it with the year and model. A pic of the tower with the specs would be awesome too.

2017 Craz with Roswell A3 Aviator tower

27064

[KnoxMojo]

2015 OZ HD is 2 3/8. Roswell has a universal clamp that has multiple size inserts. Wakemakers offers them.

[Shoebox]

2014 Mondo Oz tower is also 2-3/8"

[Hyperryd]

Thank you guys. This helps me quite a bit.

[5:00]

2 3/8" on my '07 XLV.

[VA LSV]

1-5/8" on the older rad-a-cage towers with the oval side bars.

[JimLevin]

Anybody happen to know the tube size diameter used on the pro tower for 2019? Specifically the Makai?

[HFarr]

Anybody happen to know the tube size diameter used on the pro tower for 2019? Specifically the Makai?I'm headed to the lake and can tell you later tonight.

Sent from my SM-G781V using Tapatalk

[Dukabor]

Just checked my Makai with the pro tower ion the side about a foot or so up…

https://uploads.tapatalk-cdn.com/20230622/5bba667c96e2c11c9f45fbe9e4380ca4.jpg
https://uploads.tapatalk-cdn.com/20230622/d8c14bcb673ceadd92cafa007299b238.jpg

Not sure if the diameter changes anywhere, but I’ve got 2 1/2”


Sent from my iPad using Tapatalk