Ballast Pump

[chad76]

Hey Guys I was wondering if any of you gentlemen know where to order a End Cap for a JAbsco pump 18670-6127. I was changing out impeller and like a novice unscrewed all the screws of the end plate dropped end plate and it perfectly slid right under the rear start of the hard tank on the port side. I could barely get my hands in there and could feel it with my tips of finger, but could not get to it. Any of you know how hard it would be to get to it or where to order a new one.
Thanks
Chad

[dakota4ce]

I had a scenario like this and was able to get it to creep toward me with a shop vac...!

Or park on an incline and beat the bottom of the boat with your fist or a light rubber mallet to get it to slide?

Doubt it’s magnetic....right? Would be easy if it was.


Sent from my iPhone using Tapatalk

[crr1876]

Sweep it with a wire coat hanger?


Sent from my iPhone using Tapatalk