PDA

View Full Version : 2007 Moombs LSV Tower Bolts/Screws



Aondion
04-21-2018, 12:07 AM
I have a 2007 Moomba LSV and folded down the tower for the first time last weekend, and noticed that 1 of 4 the bolts (that you hand tighten) that allow the tower to fold down is missing. It is actually the bolt on the drivers side, interior of the tower. Any idea where I can buy one?

ssevey17
04-21-2018, 10:08 AM
I'd take another bolt to a Lowe's/Home Depot etc and find out what the thread size is. Then I usually order from McMaster Carr. They have an amazing selection of hardware. The only downfall is that you don't know the shipping cost until after you've placed your order because they charge you the actual cost. I just ordered 100 torq capscrews and shipping was like $8 for reference.

kaneboats
04-22-2018, 03:15 PM
Somebody lost one of the knobs and asked about it on here about 2-3 years ago. I think McMaster Carr had the exact part. Dealer can get it too.

996scott
04-23-2018, 12:06 PM
you might be able to find one on ebay.