View Full Version : 2016 Supra SE Tower Tubing diameter?
dakota4ce
04-01-2018, 09:21 PM
I don't have a caliper on hand here at the house--so the old eyeball tape measure test has it as a tossup between 2 3/8" and 2 1/2"......DAMNIT! Does anyone know the exact answer, or do I have to go buy a caliper? LOL!
Depends on where you are measuring in order to mount something. When in a bent or arch, tubing can become elongated and end up wider in one cross section then its actual round dia.
dakota4ce
04-01-2018, 10:37 PM
Depends on where you are measuring in order to mount something. When in a bent or arch, tubing can become elongated and end up wider in one cross section then its actual round dia.
Measuring in a dead straight section. Where I plan to mount clamps.
Sent from my iPhone using Tapatalk
meetloaf13
04-02-2018, 09:40 AM
Just measure the circumference and divide by Pi?
Sent from my Pixel XL using Tapatalk
dakota4ce
04-02-2018, 10:26 AM
Excellent idea! Will do this!
Damn I am kinda disappointed I could not come up with this on my own.
Sent from my iPhone using Tapatalk
Yep, that formula works in an unbent straight section, but not when clamping on a radius.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.