winter mods...Raptor engine tray cover

[KnoxMojo]

Just ordered an engine tray for my Mojo. Reading other forums, it appears the pizza tray from the Axis A24 will work with a notch cut out for the shock hinge and maybe a bracket. This will provide some great storage and dry out vests faster. I also picked some deck tape with Mojo cut into it for the transom, should look pretty cool and save the bottom from dings and scuffs from boards.

What are your all's plans for your boat over the winter?

[supra790]

I am wanting to add something to my transom this summer too

2016 Supra SG 450

[KnoxMojo]

Chris Stewart <[email protected]> 615-826-1447

This is the person I talked to. Cost around $70 or so. They do business with Skiers Choice and should be able to get you authorized if you want the boat name cut into it. It is the same material that is used on the top side for traction. Covers about 3 inches high and the entire width of the transom. I haven't put it on yet, but will post a picture of it when I get home tonight.

[supra790]

Chris Stewart <[email protected]> 615-826-1447

This is the person I talked to. Cost around $70 or so. They do business with Skiers Choice and should be able to get you authorized if you want the boat name cut into it. It is the same material that is used on the top side for traction. Covers about 3 inches high and the entire width of the transom. I haven't put it on yet, but will post a picture of it when I get home tonight.
Cool. Thank you

2016 Supra SG 450

[Tylerrnemt]

I'm anxious to see the pic of the transom pad... been looking for something along those lines for a while.

[jbird]

I had the guys at Gator Step cut this for me when I ordered my floor package.
26459

[MJHSupra]

I had the guys at Gator Step cut this for me when I ordered my floor package.
26459

How does it work for you? Looks like it would do the trick.

I noticed one of these this summer on a BU. It looked to be $60

https://www.bakesonline.com/transom-protector-all-black-no-logo.html

Mark

[jbird]

Did the job just fine, if I had to do it over again I Wouldn’t have made it quite as tall, looks a little overkill in my opinion but it sure saves the back of the boat!

[Catman]

Where did you order the tray and how much

[KnoxMojo]

Dangit, totally forgot to upload a picture of the transom strip. I will get on the tonight as well as the info on the engine tray...sorry guys.

[KnoxMojo]

Going to put the transom protector on in the spring....the engine tray cover came from TJ at M2O Marine, 619-282-0400. It was just under $150 shipped to the house. It's meant for an Axis A24, part number 5441036.126473