PDA

View Full Version : Help getting center ballast hose installed


stx.dead.I
10-20-2017, 08:52 PM
I've got an 03 mobius lsv and we are doing the wakemakers ballast upgrade kit. I've got everything set up except for getting the larger diameter water line from the pump to the front locker.

We tried pulling up the floor and one of the screws in the left seat is stripped and we can't get it out to pull the floor.

Does anyone have any tips?

Sent from my SM-G955U using Tapatalk
jmvotto
10-20-2017, 09:12 PM
Gotta pull floor. Use a drill back out kit for stripped screws or drill it out and replace
stx.dead.I
10-20-2017, 10:35 PM
Gotta pull floor. Use a drill back out kit for stripped screws or drill it out and replaceBow is pulling the floor as simple as pulling the screws that I see around the edge of the floor and then three screws in each rear seat

Sent from my SM-G955U using Tapatalk
stx.dead.I
10-20-2017, 11:45 PM
Bow is pulling the floor as simple as pulling the screws that I see around the edge of the floor and then three screws in each rear seat

Sent from my SM-G955U using Tapatalk^*now is pulling the floor...

Sent from my SM-G955U using Tapatalk
jmvotto
10-21-2017, 08:44 PM
Yes just have to find all the screws