PDA

View Full Version : Prop shaft collar.



Gonzo914
08-28-2017, 01:49 PM
Broke collar that attaches prob to V-drive. Local dealer says gotta buy whole shaft. The new one in pic is wgong size, obvi. Any info? Place to buy? Do you have one? Know of a dealer that might have one? Any pointers from experience?

Thx,
Mikehttps://uploads.tapatalk-cdn.com/20170828/02a84f1cad00e95d3a37e3acee10c50e.jpghttps://uploads.tapatalk-cdn.com/20170828/ebd7787798c7f239b74f7506a0fbc8b0.jpghttps://uploads.tapatalk-cdn.com/20170828/a5a01a6f7cec3c44b03bbd225acfcc3f.jpg

Sent from my SM-G930V using Tapatalk

Rgar
08-28-2017, 02:03 PM
What year and model of boat is that from? Is that from general wear and tear?

Gonzo914
08-28-2017, 02:17 PM
What year and model of boat is that from? Is that from general wear and tear?

2003 Mobius LSV. Not sure how? We surf allot and load pretty heavy +/- 3000lbs.

BT_48170
08-28-2017, 02:28 PM
Looks like the new one that is too large might be able to be machined down to match the old one. Could check with a local machine shop or auto parts store that does machining, might be cheaper if the only other option is buying the whole shaft. You probably need the size of the broken bore though or clearance to the shaft.

VA LSV
08-28-2017, 02:37 PM
Looks like the coupler for a dual taper shaft is only available as a complete assembly. You can call these guys to confirm.

https://www.bakesonline.com/detail.aspx?ID=3263
http://www.skidim.com/ARE-SHAFT-SYSTEM-1-1_8-X-3-1_2-COUPLER/productinfo/WS-2050B/

Gonzo914
08-28-2017, 04:23 PM
Looks like the coupler for a dual taper shaft is only available as a complete assembly. You can call these guys to confirm.

https://www.bakesonline.com/detail.aspx?ID=3263
http://www.skidim.com/ARE-SHAFT-SYSTEM-1-1_8-X-3-1_2-COUPLER/productinfo/WS-2050B/

Thx, looks like youre right...

Sent from my SM-G930V using Tapatalk

kaneboats
08-29-2017, 08:57 AM
Call this guy before you give up.

http://elberts.com

Gonzo914
08-29-2017, 02:34 PM
Call this guy before you give up.

http://elberts.comNope, the whole shaft, again....

Sent from my SM-G930V using Tapatalk

Gonzo914
08-30-2017, 08:45 AM
Update, local shop had sold me wrong coupling. Way to big. Local machine shop going to make it work... hopefully.

Sent from my SM-G930V using Tapatalk