mmandley
08-25-2017, 12:57 PM
I've been fighting with my bilge pump all winter it seems
Sometimes it works, other times it doesn't.
Sometimes it has low flow pressure other times it's fine lol
Anyhow I ended up flushing the out line from the bilge to port drain that fixed flow issues
Replacing it fixed the intermittent issue.
The problem I have now is auto bilge isn't working
The switch wire will turn on the pump, if I put the switched wire on the float side when you raise the float it will work also.
My question is, I assume one wire is switched on and the other is hot all the time for the float on auto.
Is there a separate breaker? I check all the ones under my dash.
My main breaker is of course on as everything works as intended.
Sent from my iPhone using Tapatalk
Sometimes it works, other times it doesn't.
Sometimes it has low flow pressure other times it's fine lol
Anyhow I ended up flushing the out line from the bilge to port drain that fixed flow issues
Replacing it fixed the intermittent issue.
The problem I have now is auto bilge isn't working
The switch wire will turn on the pump, if I put the switched wire on the float side when you raise the float it will work also.
My question is, I assume one wire is switched on and the other is hot all the time for the float on auto.
Is there a separate breaker? I check all the ones under my dash.
My main breaker is of course on as everything works as intended.
Sent from my iPhone using Tapatalk