View Full Version : 2014 moomba mondo oz hd tower slotted bolt at base
Jbh_jr
08-20-2017, 11:57 PM
The slotted 5/8" threaded bolt/pin at the base of my tower backed itself out and came off somewhere on the highway. I can't find a replacement anywhere. Anybody know where I can find one?
pvlad
08-28-2017, 11:06 PM
The slotted 5/8" threaded bolt/pin at the base of my tower backed itself out and came off somewhere on the highway. I can't find a replacement anywhere. Anybody know where I can find one?
I'm missing mine too. Ware you able to find a replacement one?
Pls let me know if you did and where from.
Thanks.
BrettLee3232
08-29-2017, 12:46 AM
I hate that damn bolt. I finally put some loctite on it and it stopped backing out 🤷🏼*♂️
Sent from my iPhone using Tapatalk
Jbh_jr
08-30-2017, 11:03 AM
I'm missing mine too. Ware you able to find a replacement one?
Pls let me know if you did and where from.
Thanks.
I ended up buying a threaded bolt cutting off the hex head, ground down the threads, leaving about 5/8" of the remaining threads and notching the end so I could use a slotted screw driver to tighten. Took me about 1/2 hour with a hand grinder and bench vise.
Jbh_jr
08-30-2017, 11:11 AM
Yeah me too! I noticed the one side of the tower bouncing up and down while towing a wakeboarder. I ended up machining my own bolt and adding loctite to both sides. Problem solved!
BrettLee3232
08-30-2017, 12:28 PM
Such a horrible design [emoji35]
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.