View Full Version : Cutter SS props
06-10-2003, 10:30 AM
I am looking at a cutter prop, any advice from those running cutter? Are you happy them?
06-10-2003, 01:58 PM
I am running the Cutter SS 13 x 13½ prop. I got it to replace the stock prop that came on my boat after it lost in a battle against the boat launch (I was not driving). The prop has been working great, I would not have a problem buying a Cutter prop again. I have a 2001 Mobius with the 310HP motor.
06-10-2003, 11:36 PM
I have had much sucess with the performance of th O.J. stainless prop.The prop. is very compatible with the Cutter, but is no longer offered by SkiersChoice.Brian Raymond
06-11-2003, 03:34 AM
I've been using a Cutter 13X13.5 for a year on a 1998 Mobius and it does me fine. When I purchased the prop, there was a torque vs speed curve somewhere on the internet and is compared to the OJ. If I remember right, the Cutter outperformed at the low end so for a big guy as I am I thought that would be to my advantage. Good luck.
06-11-2003, 08:49 AM
Thanks guys, I am going with a Cutter SS prop. I hope I can notice some difference.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.