PDA

View Full Version : 2013 LSV/Delta


mgsaad
08-12-2017, 11:25 PM
I have a 2013 LSV and have never been able to get much of a surf wave. I recently bought a Delta wakeshaper by Mission but am still not having much success. Does anyone have one of these? Where exactly do you position it on the hull? How do you set up the ballast in conjunction with the Delta?
Thanks.
JoelFett
08-12-2017, 11:32 PM
Big bags! Thats what you need. I have 1100s in rear and the IBS in front, total about 3300 lbs+/- I put my suck gate as far back as I can and go 100/75 in the rear and fill the front weight. Usually have a mid thigh wave. https://uploads.tapatalk-cdn.com/20170813/1cdd3d179142edafebd7545e71cbd8f2.jpg

Sent from my SM-G930V using Tapatalk
Stazi
08-13-2017, 03:55 PM
Yep. Weight weight weight! My buddy's LSV surfs awesome. We use a wake shaper. 1100's in the rear, center and bow bag and then another 400 on surf side and 400 on back seat. Make a huge long wave.


Sent from my iPhone using Tapatalk
icemanftr
08-13-2017, 07:50 PM
Listed with 1100 surf and front with ibs full. Or 80/60/100 with wakeshaper.


Sent from my iPhone using Tapatalk
Jeepers
08-28-2017, 08:14 PM
I have a 2013 LSV and have never been able to get much of a surf wave. I recently bought a Delta wakeshaper by Mission but am still not having much success. Does anyone have one of these? Where exactly do you position it on the hull? How do you set up the ballast in conjunction with the Delta?
Thanks.

I've had the Mission Delta on my 08 LSV now 2 years. The first season I was really happy with it, I couldn't consistently get a clean wave. This season I decided to reverse it. I removed the "delta" and attached it backwards. Now I place it as deep and as far back as I can possibly get it with suction cups facing the bow and delta positioned toward transom. In this position it consistently produced a very clean wave and the push was greatly increased. It also has no splash and never falls off.

Like everyone stated in ballast.


Sent from my iPhone using Tapatalk
Jeepers
08-28-2017, 10:38 PM
I've had the Mission Delta on my 08 LSV now 2 years. The first season I was really happy with it, I couldn't consistently get a clean wave. This season I decided to reverse it. I removed the "delta" and attached it backwards. Now I place it as deep and as far back as I can possibly get it with suction cups facing the bow and delta positioned toward transom. In this position it consistently produced a very clean wave and the push was greatly increased. It also has no splash and never falls off.

Like everyone stated in ballast.


Sent from my iPhone using Tapatalk

Like this but lower. (Photo stollen from web.)



Sent from my iPhone using Tapatalk