So, Enzo's aren't the biggest bag.

[The General]

I have read a lot about the Enzo bags on here so I assumed that they were the biggest bags availible. I went on Wakemakers to buy a set and while I was looking around I found these custom bags for 2012-2014 MB Sports F24. They are the same shape as the Enzo's but a little bigger main body and slimmer arms.( I don't have the dimensions, this is what the guy from Wakemakers said) They are 1595lb bags. I bought a set and should have them on Tuesday so I will post pics then but I'm wondering why I haven't seen them mentioned on here anywhere.
I also found it interesting that they were $409/bag while the Enzo's were $489/bag

[BrettLee3232]

Maybe cause they are to big?


Sent from my iPhone using Tapatalk

[MLA]

Likely because they are a custom design for an MB. Custom means its to your design. Fly High has been doing customs for YEARS, so why not do your own?

[moombahighrider]

I am keen to hear how they go in the lockers. There is extra room in the mojo lockers with the Enzo's.

[The General]

[QUOTE=MLA;312130]Likely because they are a custom design for an MB. Custom means its to your design. Fly High has been doing customs for YEARS, so why not do your own?[/QUOTE
My thought was that these are enormous bags that should fit and are on the shelf. Even if they don't completely fill, they will likely hold more water than the Enzo's and they cost less. Plus with the larger size of the main body of the bag, I'm hoping to be able to save some storage by folding the arm back under itself.(I believe it was mattsask that suggested this in another thread)
i also have a buddy with an MB 24 so if these really are too big, I can pawn them off on him.

[sivs1]

This is good to hear. I need to run 2,000lbs surf side to have a fabulous wake. I have the 250lb hard tank, so another 1,600 could get me close. Having three bags take up seating and floor space sucks.

Sent from my SM-G930V using Tapatalk

[mattsask]

How much longer are they? Anything more that 8" longer than the enzo's will be too long for a mojo. The enzo's fill my craz end to end and the mojo bench is only 8" longer, so you may not actually be gaining any usable bag...

Sent from my SM-G900W8 using Tapatalk

[stevemarich]

The body is bigger ,which the measurements on the enzos do use up the whole rear locker , according to measurements anyway , the biggest upside would be less money , even if you only got the same weight as enzos in them , excited to see the results

[The General]

I got to install the bags and test them today. They completely fill the lockers. I had to fold about 1' under on the Port side because of the heater Location, and about 1-1/2' on the Starbord side really just for some space for my anchor and ropes. These things make a huge difference to the wake. Lots of push now. 25980259812598225983

[russellsmojo]

You can tell by timer about how much weight they are taking before overflowing. How long did they take to fill ?


Sent from my iPhone using Tapatalk

[KG's Supra24]

Did you receive dimensions of the bag? They are not posted on Wakemakers website.


1100s: 50x24x24
1180 (tige z3): 83x23x24
1450 (enzo): 102x25x26
1595 (MBs): ????

I'd kinda like something in the ballpark of 90x22x28 (less width, more height, short enough not to take up storage)

[russellsmojo]

If anyone is looking for 1,100's. Sit tight...they about to be on sale on the forum!


Sent from my iPhone using Tapatalk

[Azsunrider]

I just bought a used 2015 Mojo surf edition. Just installed the 1100's and didn't read enough on the forum to know about the Enzo's. I'm returning the 1100's and the enzo's are on their way. Also have on order the 2.0 plates. Wakemakers didn't know what attachments I needed. Can someone help me know what I need to get? It came with the standard 650's on it. I'm thinking I can use the same hoses from the original and might need to get new attachments.

Any other recommended upgrade ideas or techniques would be appreciated. Pretty depressed trying to surf on factory ballast and than going on a family's MC x55 with two sumo sacks in the back.

Also, my center ballast doesn't seem to empty all the way. It looks like it is about 30% full when the pump seems to be pumping air, and I've never gotten any water in the center (front) bags, before it starts pumping out the vent/overflow. Any ideas? I haven't really gotten under the floorboard yet, but thought I'd ask if someone knew something. The last six things I thought were broke on this thing, were just etting issues. I hope this is the same.

Thanks

[The General]

[QUOTE=russellsmojo;312452]You can tell by timer about how much weight they are taking before overflowing. How long did they take to fill ?


So the first time I filled them I was moving so it was extremely longer but the last two times they took 17 min on Starboard and 18.5 for port.

[russellsmojo]

I would have thought moving would have made them faster? But no proof of that.

I don't think you are getting 1,600 pounds that fast. My guess would be about 1,300. Might try filling them some more once you take off running.


Sent from my iPhone using Tapatalk

[The General]

[QUOTE=russellsmojo;312812]I would have thought moving would have made them faster? But no proof of that.

I don't think you are getting 1,600 pounds that fast. My guess would be about 1,300. Might try filling them some more once you take off running.


Yeah I have them folded under so I'm probably Limiting the bags to about 1400. & 1500 on port and starboard, respectively.

[The General]

Anyone have any idea how to get fittings out of the factory bags? For some reason they're glued in����*♂️

[mattsask]

It's a crap shoot whether or not they'll come out without damaging the bags. Just order new ones.

Sent from my SM-G900W8 using Tapatalk

[dusty2221]

There are videos on how to remove them. Long story short, point your wife's blow dryer at the fitting for 5 minutes. Come back and step at an angle on the fitting and it will pop right out.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[moombahighrider]

It's a crap shoot whether or not they'll come out without damaging the bags. Just order new ones.

Sent from my SM-G900W8 using Tapatalk

I agree with this. I looked into stealing the factory fittings on my 900 bags and let that idea go pretty quickly....

[The General]

I bought wakemakers bags so I had no choice but to buy new fittings because they have the larger 1" npt threads. I want to sell the bags but they used two fill ports and two drain ports on each bag. 26091

[lsvboombox]

i popped out the fittings from my stock bags. I dont think the fittings would be good to re use.. the glue gets stuck around the rubber o ring and will not allow it to make a good seal.. I put new fittings in the stock bags and I get a perfect seal. filled the bags with air and they have been solid ever since. There is still some glue residue that remains but it doesnt interfere with the new fittings and oring....

I guess you could buy new orings and scrape the glue off to get them to work but seems easier to buy new fitings

[corvette8189]

Did you receive dimensions of the bag? They are not posted on Wakemakers website.


1100s: 50x24x24
1180 (tige z3): 83x23x24
1450 (enzo): 102x25x26
1595 (MBs): ????

I'd kinda like something in the ballpark of 90x22x28 (less width, more height, short enough not to take up storage)


Main body dims: 45"L x 24"W x 24"H
Leg Dims: 66"L x 24"W x 7"H

Overall length: 111"

Capacity:1595 lbs