PDA

View Full Version : Autoflow vs Autflow 2.0



wetfly112
07-12-2017, 02:57 PM
I have a 2015 mojo surf edition with autoflow. Was wondering if it is worth it to upgrade to the 2.0 plates for the cost? thoughts?

lsupcar
07-12-2017, 10:39 PM
What's the cost?

BrettLee3232
07-13-2017, 03:48 AM
I have a 2015 mojo surf edition with autoflow. Was wondering if it is worth it to upgrade to the 2.0 plates for the cost? thoughts?

I highly recommend! Easiest upgrade you can do to your wave. Not sure on cost anymore but contact.....

http://www.wakelandmfg.com/oem

[email protected]

865-724-1625


Sent from my iPhone using Tapatalk

jbauer
07-13-2017, 05:33 PM
The Autoflow 2.0 upgrade kit is $397 plus Shipping. I am trying to figure out what exactly comes with it and the complexity of the upgrade.

wetfly112
07-13-2017, 06:34 PM
Where is that upgrade price from? Wakeland or your dealer?

BrettLee3232
07-13-2017, 06:35 PM
The Autoflow 2.0 upgrade kit is $397 plus Shipping. I am trying to figure out what exactly comes with it and the complexity of the upgrade.

Should just be new blades, easy swap out. 5-10 min max.


Sent from my iPhone using Tapatalk

jeamk03
07-17-2017, 05:41 PM
I highly recommend! Easiest upgrade you can do to your wave. Not sure on cost anymore but contact.....


Brett, 2 questions if you don't mind:
1-You kept your old actuators?
2-What improvement did you see as result of adding the 2.0 plates?

I'm surfing just fine behind the 1.0 tabs, but this seems like a slam dunk if it improves the wave.

BrettLee3232
07-17-2017, 08:33 PM
Brett, 2 questions if you don't mind:
1-You kept your old actuators?
2-What improvement did you see as result of adding the 2.0 plates?

I'm surfing just fine behind the 1.0 tabs, but this seems like a slam dunk if it improves the wave.

1) No, I did not replace actuators or mounting brackets. Only the blades them selves. I think there's like 6-8 nuts/bolts on each side.

2) I'm fat so I was having problems going ropeless on light days with just 2 on board. I was constantly pumping to stay in the pocket. New blades installed and only had a driver and I was ropeless. Boat had a lot push. I couldn't really tell if it was bigger or not though.


Sent from my iPhone using Tapatalk

Fat-chance
07-17-2017, 08:39 PM
I upgraded before the beginning of the 2016 season. It was worth it for sure. We were able to get more push out of the wake. I just replaced the surf plates. Actuators and brackets remained the same.

jeamk03
07-17-2017, 08:52 PM
Sweet! I'm going to order today. Thanks for the input.

Sent from my SM-G950U using Tapatalk

BrettLee3232
07-17-2017, 10:42 PM
[emoji1305]


Sent from my iPhone using Tapatalk

wetfly112
07-25-2017, 02:19 PM
Who do you order plate upgrade through?

BrettLee3232
07-25-2017, 02:21 PM
Who do you order plate upgrade through?


I highly recommend! Easiest upgrade you can do to your wave. Not sure on cost anymore but contact.....

http://www.wakelandmfg.com/oem

[email protected]

865-724-1625


Sent from my iPhone using Tapatalk

Read first reply...


Sent from my iPhone using Tapatalk

Azsunrider
08-08-2017, 08:11 PM
Just got the upgraded 2.0 wakeplates for a 2015 mojo. They sent the side plates. Isn't the center trim/plate bigger too? I talked to them and they said the sides were the only part of the upgrade.

BrettLee3232
08-08-2017, 08:28 PM
Just got the upgraded 2.0 wakeplates for a 2015 mojo. They sent the side plates. Isn't the center trim/plate bigger too? I talked to them and they said the sides were the only part of the upgrade.

The trim plate is not part of the 2.0. The older trim plate is made by a different manufacturer so the holes don't line up. I thought trying to make it work but I don't think it's worth it.


Sent from my iPhone using Tapatalk