2016 Moomba Mondo Surf Edition NEED HELP!

[jovan]

Hey guys I have been reading through a lot of forums and can not find a solution to my problem and I have tried almost everything.

My problem is that I can not get my goofy surf side to be clean and surf able. I have played around with filling and draining different spots in the boat also played with the auto flow settings, speed, wake plate and I even purchase a surfgate to attach to the boat.

I am getting really frustrated I have had 7 people in the boat in different spots to see if it cleans up the white wash I am getting it helps alttile but it is not as nice as the regular surf side that I cant ride. Please any pointer to help would be great

[pat6969]

I'm having similar problems and the consensus is 1100 lb bags in the back lockers. I just ordered them and will try it out this weekend. Mine is a 2015 with man flow but we'll see what the extra weight does.

[JD14Mondo]

I have a 14. Goofy side tends to need a lot more listing than the regular side. I also run about 1 mph faster. I have 900 lb rear bags and the manual flow. So I can't help with the auto flow settings.

[jovan]

What ballast bags are you putting in. I am most likely going to upgrade to 1100's but I don't know what kind to get or if I need some special fittings? Any advice on this?

[dlowe]

Agree with JD14Mondo - speed up and lean it more (65%-75% port side & 75% front ballast). Wake plate will help adjust some of the wash too (bring it to 3/4 rather than full up)

[pat6969]

I have a 14. Goofy side tends to need a lot more listing than the regular side. I also run about 1 mph faster. I have 900 lb rear bags and the manual flow. So I can't help with the auto flow settings.

How full can you fill your 900's? I see they are 50x22x22 in size which puts a fair amount of the bag under the back seat. Do they conform to the space and mostly fill into the lockers without pushing up on your back seat cushions? I ordered the 1100's which are 50x24x24, so yours are fairly close in size for me to get an idea of what to expect.

[jovan]

What kind of bags did you buy and did you need to get extra fittings?


How full can you fill your 900's? I see they are 50x22x22 in size which puts a fair amount of the bag under the back seat. Do they conform to the space and mostly fill into the lockers without pushing up on your back seat cushions? I ordered the 1100's which are 50x24x24, so yours are fairly close in size for me to get an idea of what to expect.

[pat6969]

What kind of bags did you buy and did you need to get extra fittings?

I bought Fatsac 1100's. I just bought the 1" fitting that goes into the bags. The quick connect piece will stay on the fill/drain and vent lines when you disconnect. The other side of the fittings that are in the stock bags are glued in so I left them in and ordered new ones, they are cheap.

[jovan]

I bought Fatsac 1100's. I just bought the 1" fitting that goes into the bags. The quick connect piece will stay on the fill/drain and vent lines when you disconnect. The other side of the fittings that are in the stock bags are glued in so I left them in and ordered new ones, they are cheap.

Is this the bag?

https://www.wakemakers.com/fly-high-jumbo-surf-sac.html

and is this the fitting?

https://www.wakemakers.com/fly-high-pro-x-series-fitting-w743.html


Do you have any issues with the 1100 lbs bags being full?

[pat6969]

Is this the bag?

https://www.wakemakers.com/fly-high-jumbo-surf-sac.html

and is this the fitting?

https://www.wakemakers.com/fly-high-pro-x-series-fitting-w743.html


Do you have any issues with the 1100 lbs bags being full?

Yes, yes, and not sure yet. I just ordered them and won't be able to test until this weekend. I'm hoping they will work, ton's of guys recommended going to the 1100's so I guess they should work. About 1' of the bag will be under the back seat so I'm hoping the bag will compress in that area and fill up more in the back lockers. You will also need these apparently.

https://www.wakemakers.com/engine-divider-panel-saver.html

I'm up in Canada so I'm going to try and build a set this week. Luckily I found the bags and fittings locally so I didn't have to wait for them from the states.

[jovan]

what province are you in? I live in Canada to. did you get everything in Canada?

[JD14Mondo]

How full can you fill your 900's? I see they are 50x22x22 in size which puts a fair amount of the bag under the back seat. Do they conform to the space and mostly fill into the lockers without pushing up on your back seat cushions? I ordered the 1100's which are 50x24x24, so yours are fairly close in size for me to get an idea of what to expect.

The part that goes under the seat conforms to the space and does not push the seats up. install the panel savers the bags fill the lockers and push hard on the engine panels.

[pat6969]

The part that goes under the seat conforms to the space and does not push the seats up. install the panel savers the bags fill the lockers and push hard on the engine panels.

Awesome!! Thanks!!

[pat6969]

what province are you in? I live in Canada to. did you get everything in Canada?

I'm in Alberta. I ordered from here.

http://www.shuswapsnb.com/

[jovan]

I just purchase the 1100 lbs and installed. I am still having issues with the goofy side. what is everyone auto flow setting at and how should I weight the boat?

[Yobrandon]

I just purchase the 1100 lbs and installed. I am still having issues with the goofy side. what is everyone auto flow setting at and how should I weight the boat?100% surf side bag, 65% non surf bag, center full, bow bag 1/2 full, 100% auto flow, wake plate up. 10 to 10.8 mph. I put two adults additionally sitting on rear corner surf side. Wave looks same both sides. https://uploads.tapatalk-cdn.com/20170716/3da309e95c6ca91cf79d486a6dfbd71e.jpg

15 Mojo Surf, 1100 rears, WS Rev 10's, 6.7 Cummins Deleted

[Yobrandon]

100% surf side bag, 65% non surf bag, center full, bow bag 1/2 full, 100% auto flow, wake plate up. 10 to 10.8 mph. I put two adults additionally sitting on rear corner surf side. Wave looks same both sides. https://uploads.tapatalk-cdn.com/20170716/3da309e95c6ca91cf79d486a6dfbd71e.jpg

15 Mojo Surf, 1100 rears, WS Rev 10's, 6.7 Cummins DeletedCheck out goofy video. Note, I am 6'8, 320lbs. http://cloud.tapatalk.com/s/596b4cc721801/received_10156945391203644.mp4

15 Mojo Surf, 1100 rears, WS Rev 10's, 6.7 Cummins Deleted

[NoleAlum]

Check out goofy video. Note, I am 6'8, 320lbs. http://cloud.tapatalk.com/s/596b4cc721801/received_10156945391203644.mp4

15 Mojo Surf, 1100 rears, WS Rev 10's, 6.7 Cummins Deleted
Nice. Almost had 360. What board are you riding?

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Yobrandon]

Nice. Almost had 360. What board are you riding?

Sent from my SAMSUNG-SM-G900A using TapatalkRonix powertail. 4'11

15 Mojo Surf, 1100 rears, WS Rev 10's, 6.7 Cummins Deleted

[klemmy]

I have a 2016 Mondo. Stock bags didnt cut it. We ordered the 1100's from wakemakers. They came with fittings and plugs. It was a 10 minute job to swap out the bags. That helped but stock prop wasnt working great with the extra weight. I bought the Acme 1235 prop and that seemed a little better than stock but still not good enough. Then we went to the Acme 2079 prop and that made a nice difference. The boat is much more responsive when fully loaded. RPM's are around 3400 when surfing fully loaded. We fill all bags 100% full. Wake plate is all the way up. Speed 9.9 - 10mph. Port side setting 65%, starboard 75%. With 4-6 adults these settings are perfect. We are getting a nice long wave, everyone can throw the rope.

[jovan]

Nice. Almost had 360. What board are you riding?

Sent from my SAMSUNG-SM-G900A using Tapatalk

Wow this looks amazing I am going to try these setting tomorrow if it doesn't rain.