Is it ok to mount my amp here?

[Leirhiht]

Got a 08 mobius and I have no room to mount my new amp where the other two are. So I was wondering if it is alright to mount the amp on the wall that the air intake tube coming from underneath the port side windscreen. I couldn't get attachments to work so I have a photobucket link. Thanks for reading

http://i934.photobucket.com/albums/ad189/Leirhiht/20170625_161830_zpsgnfv6yxk.jpg (http://s934.photobucket.com/user/Leirhiht/media/20170625_161830_zpsgnfv6yxk.jpg.html)

[Stazi]

Yes, just don't use massively long screws that will pass through that and into the outer hull.


Sent from my iPhone using Tapatalk

[David Analog]

Hey Dallas,
Pull the vent flange and check the thickness of the fiberglass. Those columns can be very thin glass and four #8 screws holding a heavy object could be iffy....so the size/weight of the amplifier might be the determining factor. You could always use a carpeted amp panel that is glued in place if you don't trust screw-mounting.

[viking]

I used that exact spot to mount 2 - JL MHD amps. worked Great!!
25887

[cornrickey]

I cut the carpet from mine and mounted a sheet of hdpe on it with screws and adhesive I creasing the surface area to mount my two larger amps on it. Keeps them off the floor, dry and in the air.

[TrueKaotik]

Yes you can do that...

[David Analog]

Btw, if ever needed, that is a great location to elevate the amplifier a bit and install a flush-mount fan directly underneath. The amplifier chassis would act a like a natural shroud, and you are creating dual air exchanges, one, around the amplifier chassis, and two, through the port compartment.

[TrueKaotik]

�� David.... that's funny right there...