PDA

View Full Version : Fresh Air Cover Help


mparker2997
07-01-2017, 04:13 PM
2012 LSV....
I broke the plastic fresh air cover on driver side and have one on the way. There are two screws behind windshield. I assume I have to raise windshield to get to them.

Anyone have experience doing this?
trayson
07-02-2017, 01:22 AM
if it's anything like my 2008 XLV, then no, you don't have to raise the windshield. you just have to get in there with a small bit. or with a bendy bitdriver extension.

Oh, I think I remember that I used a phillips bit and a 1/4" box wrench to get mine out... No way in hell I was taking out a windshield!!
mparker2997
07-03-2017, 08:31 PM
if it's anything like my 2008 XLV, then no, you don't have to raise the windshield. you just have to get in there with a small bit. or with a bendy bitdriver extension.

Oh, I think I remember that I used a phillips bit and a 1/4" box wrench to get mine out... No way in hell I was taking out a windshield!!

I will need to be very creative to get to one of the screws. I can see possibly getting a bit on it....but applying pressure and removing screw will be very difficult.