PDA

View Full Version : Assorted Ballast Bags for Sale


Stazi
06-19-2017, 05:37 PM
I'm selling a bunch of bags that myself and two buddies have, that we don't need anymore. They are all fly high bags. Available bags are:
2x low profile 400lb bags ~ 53"x9"x19" good for either on side of engine or under side seats $100 (pair)
1x 750lb V-drive bag 50"x20"x20" $85
1x center locker 600lb bag ~62x16"x16" $80
1x 1000lb open bow triangular sack $100

I will split the shipping with the buyer, which I get at a corporate discount.


Sent from my iPad using Tapatalk
That Guy
06-19-2017, 06:11 PM
Hmm...tempting.

Any idea what the width of the walkway is under the bow cushion on a Craz?

My boat is several hours away or I'd check, but wondering if one of those low profile bags would fit there?
Stazi
06-19-2017, 09:22 PM
Should fit. It will be squeezed a bit at the very front, but nothing too drastic.


Sent from my iPad using Tapatalk
Stazi
06-19-2017, 09:25 PM
The center locker bag would actually fit better and could sit in the front walkway


Sent from my iPad using Tapatalk
sean2451
08-09-2017, 04:54 PM
Do you still have the 1,000lb open bow triangle sack?
Stazi
08-09-2017, 07:56 PM
Yes I do. PM me if you want it.


Sent from my iPhone using Tapatalk
cfdrews12
08-13-2017, 09:59 PM
still got the 750 Vdrive bag? I assume that is the one that will fit next to the VDrive in either port or starboard locker? Can you confirm and let me know. If you have it, what external pump will fit this bag as I'm doing this for a gift to get a buddy up and running to start trying his surf voyage.

Thanks.
Stazi
08-14-2017, 01:58 PM
Sold the 750 a while ago


Sent from my iPad using Tapatalk
sivs1
08-22-2017, 12:25 PM
I'm interested in the center locker bag and the 2 400's , if you still have them any package deal you are willing to offer on all three? These come with fittings?

Trying to build a DIY Enzo bag for my SA, not sure if these will even work but size might be just right.
Stazi
08-22-2017, 01:59 PM
Yes I have all three with quick disconnect fittings. Replied to your PM.


Sent from my iPhone using Tapatalk
Stazi
08-23-2017, 03:05 PM
All sold. Thanks!
sivs1
08-23-2017, 03:15 PM
thanks Stazi, can't wait to get them and see if my DIY Project will work.

If not anyone interested in a Beautiful 2013 SA 450?