View Full Version : Wake Plate Gauge Reading/Lights Flashing

08-11-2006, 09:57 AM
Last time I took out the boat the trim tab gauge was reading inaccurately. I would have it all the way up and i the gauge would read it was half way. I can tell by the ride of the boat where it is postioned, I looked at the pplate and hydraulic arms-no damage.

Any thoughts?

Lights are flashing 3 times at various intervals at night. All the dash lights randomly blink. I have the dual battery and have the setting as recommended in the manual as not to drain a battery, I believe it says to have it on battery one switch, but my dealer had told me at the test drive to leave it on 1 & 2. I'm reluctant to put it on both and drain the battery, night cruising takes up alot of power with all the lights and music with iPods, q-beams etc. Possible electric issue. I'll try it on one and two setting and post what the results are.

08-11-2006, 10:21 AM
Sounds like a ground problem.