Flag Holders

[SorryCharlie]

Didn't know if you guys had seen these.
http://bigairwaketowers.com/accessories/flag-holder/

I ordered one, seem to be of good quality, a little pricey. They are on back order, should receive in a couple of weeks. I just didn't like what I saw on Amazon. Want to hang my UGA flag on my boat.

[kaneboats]

Want to hang my UGA flag on my boat.

Why would you want to do that?

[North Woods Mobius]

Looks nice, if not a bit pricey ... I went with the Bulletlines flag holder, which is actually on sale for $39.99 (from $49.99) on their website:
https://uploads.tapatalk-cdn.com/20170604/b59f9c7c4b5ff6e8eedcd5ee6607da3c.jpg

Here's mine installed on an OZ HD Tower on my 2014 LSV:
https://uploads.tapatalk-cdn.com/20170604/9574373445c90493a914dd1a8ef6d224.jpg

Oh, and my new flag for the 6pm-7pm hour ....
https://uploads.tapatalk-cdn.com/20170604/29f02b980dd64fbd657b05da7b28c9a8.jpg


Sent from my iPad using Tapatalk

[pslitty]

Looks nice, if not a bit pricey ... I went with the Bulletlines flag holder, which is actually on sale for $39.99 (from $49.99) on their website:
https://uploads.tapatalk-cdn.com/20170604/b59f9c7c4b5ff6e8eedcd5ee6607da3c.jpg

Here's mine installed on an OZ HD Tower on my 2014 LSV:
https://uploads.tapatalk-cdn.com/20170604/9574373445c90493a914dd1a8ef6d224.jpg

Oh, and my new flag for the 6pm-7pm hour ....
https://uploads.tapatalk-cdn.com/20170604/29f02b980dd64fbd657b05da7b28c9a8.jpg


Sent from my iPad using Tapatalk

Where did you get the flag pole from for the bullet lines holder?


Sent from my iPhone using Tapatalk

[North Woods Mobius]

Where did you get the flag pole from for the bullet lines holder?


Sent from my iPhone using Tapatalk

I went with the Taylor Made 18" flag pole at Overton's at: http://www.overtons.com/modperl/product/details.cgi?pdesc=Taylor-Made-Flag-Pole-With-Charlevoix-Flag-Clips-18L&i=21609&utm_medium=cpc&utm_source=googlebase&s_kwcid=googlepla&cvsfa=2587&cvsfe=2&cvsfhu=3231363039&s_kwcid=adwords__&gclid=CjwKEAjw387JBRDPtJePvOej8kASJADkV9TLUDcv_Bsd Ci56Mw5PZ6gR1XY_-lv8YuQ65Dwo48sAzxoCp4Xw_wcB

https://uploads.tapatalk-cdn.com/20170604/2a23d64011662592726c7da152a4c1c5.jpg

I jerry-rigged a solution for a tight fight into the Bullet Lines flag holder using a roller paint brush head pushed onto the base of the flag pole, and it works perfectly. The flag clips are great and hold the flag perfectly even while skiing at 32mph+. At $29.99 there are probably cheaper options out there, but the quality and finish are terrific and it looks great with the holder. Oh, and you can grab one at Overton's with 20% off and free shipping :)


Sent from my iPad using Tapatalk

[SorryCharlie]

Looks nice, if not a bit pricey ... I went with the Bulletlines flag holder, which is actually on sale for $39.99 (from $49.99) on their website:
https://uploads.tapatalk-cdn.com/20170604/b59f9c7c4b5ff6e8eedcd5ee6607da3c.jpg

Here's mine installed on an OZ HD Tower on my 2014 LSV:
https://uploads.tapatalk-cdn.com/20170604/9574373445c90493a914dd1a8ef6d224.jpg

Oh, and my new flag for the 6pm-7pm hour ....
https://uploads.tapatalk-cdn.com/20170604/29f02b980dd64fbd657b05da7b28c9a8.jpg


Sent from my iPad using Tapatalk


Is that adjustable, can you turn in the direction you want to hang the flag?

[SorryCharlie]

Why would you want to do that?

Because the Big Dawgs gotta eat :D Woof Woof

[North Woods Mobius]

Is that adjustable, can you turn in the direction you want to hang the flag?

Yup, the clips on the flag pole turn which ever direction you need and they hold really well. And the Bullet Lines flag holder is also adjustable to set the folder at any angle you need based on where you mount it on your tower .... I've got mine set at slightly less than 90 degrees so that our skis don't hit the flag pole when I'm using the fixed upper ski racks. In fact, here's a pic showing us at 32mph with one of our HO skis in the upper rack:

https://uploads.tapatalk-cdn.com/20170604/2c3571486c766d586b7308e924e024b3.jpg


Sent from my iPad using Tapatalk

[trayson]

+1 for the bulletlines flag holders.
http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/0511172110b_HDR_zpssht8kmyv.jpg

http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/0502172209a_HDR_zpsu53nndih.jpg

[Dandy21]

What are y'all using for flag poles with the Bullet Line holders? I have 2 of them and some flags, but haven't decided on the poles.

Sent from my VS995 using Tapatalk

[trayson]

What are y'all using for flag poles with the Bullet Line holders? I have 2 of them and some flags, but haven't decided on the poles.

Sent from my VS995 using Tapatalk


I got some gray 3/4" irrigation pipe from home depot. it has a little flex to it, but mostly stiff. I think they're 4' long. Drilled 2 holes and attached the flags with zip ties. Ran 2 rows of duct tape on the bottom to take up the play between the tubing and the holder. works great. Put a cap on the threads on top to finish it off.
http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/0511172111_HDR_zpsjtwt1b68.jpg

http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/FB_IMG_1496085907269_zpsyjfw2gzw.jpg

[Dandy21]

I got some gray 3/4" irrigation pipe from home depot. it has a little flex to it, but mostly stiff. I think they're 4' long. Drilled 2 holes and attached the flags with zip ties. Ran 2 rows of duct tape on the bottom to take up the play between the tubing and the holder. works great. Put a cap on the threads on top to finish it off.
http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/0511172111_HDR_zpsjtwt1b68.jpg

http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/FB_IMG_1496085907269_zpsyjfw2gzw.jpg

Thank you sir, I appreciate the reply! I was thinking I would need something a bit more sturdy, but some of that tubing is pretty thick walled, never even thought about it. I may do the dame and try and put small eye bolts through it for the flat to attach to.

Looks like you have Corson's surf racks or something similar. I have a set of these to install on our boat as well.

[trayson]

Thank you sir, I appreciate the reply! I was thinking I would need something a bit more sturdy, but some of that tubing is pretty thick walled, never even thought about it. I may do the dame and try and put small eye bolts through it for the flat to attach to.

Looks like you have Corson's surf racks or something similar. I have a set of these to install on our boat as well.

Yep, I made something similar. Comes in really handy. The other night, I had 3 thick EPS surf boards and my foil board all on either the cargo bimini or the overhead racks. Here's a pic with 3 of my 4 spots taken:
http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/output_zpsmr822nxf.jpg

Here's a pic of the initial install. Later however, I had to move the rack to it was more centered over the clamps. I was getting way too much play on the front end. Even with 1/4" aluminum flat bar, it was bouncing way too much and I didn't like all that flex on my boards as we were moving... Especially the foil board.
http://i1070.photobucket.com/albums/u492/traysonh/Moomba%20XLV/0502172208c_HDR_zpsahms8wpf.jpg
I'm still trying to figure out optimal solution, as now with the racks centered over the tower clamps, I'm getting interference with my wakeboard line when I cut all the way out. Overall they work great though.