trayson
05-22-2017, 04:59 PM
I have some motorized ball valves that I bought for a ballast project and didn't end up using.
There's a handful of people that have used these to replace the sprinkler valves on the older ballast systems.
I have one of these, 3/4"
https://i.ebayimg.com/images/i/131925666496-0-0/s-l140/p.jpg
I also have one of these that's "technically" a TEE, but the output of one of the legs is SO small that it's really not worth it. I was just going to cap the output where the flow was reduced and use it as an ON/OFF ball valve.
https://i.ebayimg.com/images/i/391080032452-0-0/s-l140/p.jpg
$50 shipped for both of these to anywhere in the lower 48 states.
There's a handful of people that have used these to replace the sprinkler valves on the older ballast systems.
I have one of these, 3/4"
https://i.ebayimg.com/images/i/131925666496-0-0/s-l140/p.jpg
I also have one of these that's "technically" a TEE, but the output of one of the legs is SO small that it's really not worth it. I was just going to cap the output where the flow was reduced and use it as an ON/OFF ball valve.
https://i.ebayimg.com/images/i/391080032452-0-0/s-l140/p.jpg
$50 shipped for both of these to anywhere in the lower 48 states.