IBS off the ski locker bag

[kpanderson07]

25608

I got an IBS for my 2014 Outback V and a kit to install it from Wakemakers. I'm not sure I got the right kit though. The top right is the bag vent line that goes to the ski locker vent. Top left is a T that goes the the through hull fitting then continues to the IBS fill port. So far so good but the middle connection in the picture has a T in it that connect to the IBS fill but where does the other part of the T go? Shouldn't I just have to run the existing bag vent line from the ski locker that went to the through hull fitting, connect it to the IBS fill port and then run the vent line from the IBS to the through hull fitting? I think I can use what I have and make it work but where would I want to put the check valves (or what I think are check valves?) Pictures of check valves below

Thanks

Karl

25609

[Stazi]

Maybe ask wakemakers?


Sent from my iPhone using Tapatalk

[kpanderson07]

I plan on calling them today but they were closed when I was working on it last night. Thought I'd tap the collective wisdom of the forum for ideas.

[jmvotto]

looks like you have them backwards the check valves should go on the vents ..

[Stazi]

looks like you have them backwards the check valves should go on the vents ..

Agreed


Sent from my iPhone using Tapatalk

[kpanderson07]

looks like you have them backwards the check valves should go on the vents ..

Thanks. It came from WakeMakers this way. I'll give them a call later today.