View Full Version : Raw water impeller
Moombers
04-10-2017, 09:44 PM
Does anybody have an exact picture showing where the impeller goes and tips to remove and replace
Sent from my SM-G920W8 using Tapatalk
kaneboats
04-11-2017, 10:20 AM
Here are two pics that should give you what you need:
25453
25454
http://www.inboardonline.com/how-to/
https://forum.moomba.com/showthread.php?26416-Changing-impeller
https://forum.moomba.com/showthread.php?17500-Impeller-replacement
I use needle vise grip to remove it. to replace: put the impeller in the pump.....turn it in the good direction so the rubber fins go in the good direction.... tap it lightly with a rubber mallet until it goes in place put back the cover with the seal ( I tighten the screws in a way to have an equal pressure on the seal)..don t forget to put lube on the impeller
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.