PDA

View Full Version : Lead/steel weight



snyderaaron
03-23-2017, 01:12 PM
How much are you guys putting in for surfing and where?


Sent from my iPhone using Tapatalk

wolfeman131
03-23-2017, 01:46 PM
440lbs, port side under side seat. There is a depression in the storage area of the SA where the cooler is supposed to be that I fill with the lead bags so that my custom ballast bags don't sink down in ther. This lets the bags drain properly.

I posted a discount code a while back for http://wakeballast.com

jmvotto
03-23-2017, 04:39 PM
120 in each rear locker under my 900's

That Guy
03-23-2017, 05:52 PM
I have 400lbs from my last boat I plan to see if it's needed on this one. On the old boat I had stuffed it all as far port and forward as I could as that boat liked bow weight, it seems I'm reading these boats like weight more centered or even back more, is that right?

mattsask
03-29-2017, 11:31 AM
I've got 420 lbs of steel plate. 6 pieces roughly 70lb each. Planning to spray em with box liner and put some of them under my IBS. Enzo's in the back now, so I shouldn't need any more weight back there

gravity
03-29-2017, 04:09 PM
I run about 750 steel plates. I have bow. And rear lockers. And 2 bags I move around. I love hard wieght so easy to hide.

reeder
04-01-2017, 02:23 PM
Would sure like to buy some of those bags from wakeballast to add to my bow but getting them into Canada would cost me an arm and a leg

The General
04-01-2017, 02:36 PM
Would sure like to buy some of those bags from wakeballast to add to my bow but getting them into Canada would cost me an arm and a leg

Contact Kris @ Inland Water Sports. He can usually get very good pricing on anything ballast related.
1-587-988-9253

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwj6mczV8oPTAhWCESwKHVwDCKsQFggaMAA&url=https%3A%2F%2Fwww.facebook.com%2FInland-Water-Sports-316832132444%2F&usg=AFQjCNHFrGTYJn57oqZXJs-Lm3mumCoi_Q&bvm=bv.151325232,d.bGg

snyderaaron
04-01-2017, 11:08 PM
Pop ballast looks cheaper


Sent from my iPhone using Tapatalk