Wiring question - tower speaker install

[Mossdahaus]

I have an '06 Outback and in the middle of installing some amps and tower speakers. I have the wiring ran down the front port leg's factory hole. I have the bolt-on style front legs fyi. My question is, how did you guys get the wiring to the inside of the boat? Pictures would be a HUGE help if possible!

[supra790]

Drill holes !!

2016 Supra SG 450

[Stazi]

If you have a tower mounted light from the factory, they should have run the wires out of the base of the starboard leg and then through a hole in the hull, via a Deutsch connector that has a flange screwed to the hull. Buy the same connector and duplicate the the method they used to go through the hull.
https://smile.amazon.com/Deutsch-14-16AWG-Flange-Connector-Contacts/dp/B01LX7AMAZ/ref=sr_1_3?ie=UTF8&qid=1488052163&sr=8-3&keywords=deutsch+flange+connector

[Mossdahaus]

Thanks for the help! I was hoping I could just lift the tower foot and slide it in through there but I think the factory-matching connector definitely works better for me!