New here. Been posting a bit so I figured I would share some pictures of our project!

[Stimbert]

We bought our craz new in July of 16, we love it! Here's some pictures of what we've done to it to make it just how we like it. I have a few more things I want to change over the next couple months just haven't had time! https://uploads.tapatalk-cdn.com/20170212/0944a2edb9de68248a7d361e60e876cb.jpghttps://uploads.tapatalk-cdn.com/20170212/f1dc05b34466c8563e155ac9dad9be81.jpghttps://uploads.tapatalk-cdn.com/20170212/c1049adadd9ba28fe9e2e21f89e6261a.jpghttps://uploads.tapatalk-cdn.com/20170212/08b0cbcae8fe07344ce3239857e8e4fc.jpg


Sent from my iPhone using Tapatalk

[Stimbert]

https://uploads.tapatalk-cdn.com/20170212/c42c1d43d4a4924cfb8adc4245956029.jpghttps://uploads.tapatalk-cdn.com/20170212/69f91d6845a6cd4146ef276c3e7b8e6d.jpghttps://uploads.tapatalk-cdn.com/20170212/3d777fac576c59a095a27e3608d53946.jpghttps://uploads.tapatalk-cdn.com/20170212/16b9fde3491627f582b5f343804f0c7a.jpg


Sent from my iPhone using Tapatalk

[Stimbert]

https://uploads.tapatalk-cdn.com/20170212/438077b074c420bc7c7ff18813fd351e.jpghttps://uploads.tapatalk-cdn.com/20170212/b24831e6b88eac77c6c960fe42b71b88.jpghttps://uploads.tapatalk-cdn.com/20170212/46822d491f2c2fe752545c4fdad071ce.jpghttps://uploads.tapatalk-cdn.com/20170212/249e5fc637b502453bb2639466a46b03.jpg


Sent from my iPhone using Tapatalk

[Stimbert]

https://uploads.tapatalk-cdn.com/20170212/1eae925e43022dcfd1e9262152f92514.jpg


Sent from my iPhone using Tapatalk

[dusty2221]

Love the touch to the fenders! Been contemplating doing ours red but I haven't wanted to mess with new gatorstep and clear vinyl for them.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Stimbert]

Thanks! We had to get new fenders for the wider tires so when they showed up raw it was a matter of whatever color I wanted to put in the gun at work [emoji23]


Sent from my iPhone using Tapatalk

[Stazi]

Looms like you bought it from Club Royale, right? Which lake are you on?


Sent from my iPhone using Tapatalk

[Stimbert]

Yep, club Royale. We don't live on the lake, we live just down the road from white lake


Sent from my iPhone using Tapatalk

[jstenger]

What is sitting on the work bench?

[Stimbert]

That was the rear seat all taken apart when I was adding the step


Sent from my iPhone using Tapatalk

[dusty2221]

Didn't even catch the step! Very nice touch there, now I'm scratching my head wondering if I should be doing that on ours, the center seat take a beating from being stepped down onto.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[That Guy]

25259

Seriously, there's some sweet changes you've made.

How'd you get the bow steps? I made the request on my order and was told Boatmate couldn't accommodate.

Also love the center seat step, I have a pad I throw down but that is nice.

Did you paint the wake plates black?

Also, the flooring...what is it?

[Stimbert]

25259

Seriously, there's some sweet changes you've made.

How'd you get the bow steps? I made the request on my order and was told Boatmate couldn't accommodate.

Also love the center seat step, I have a pad I throw down but that is nice.

Did you paint the wake plates black?

Also, the flooring...what is it?

Thank you! The bow steps I called boatmate directly and ordered them ($350). The plates are powder coated, we own a blast and powder coat shop so naturally I find things to take to work [emoji23]. The flooring is seadek.


Sent from my iPhone using Tapatalk

[mattsask]

Not usually a fan of yellow on boats, but that color combo is absolutely sick! Love it! What % is your tint?

Sent from my SM-T230NU using Tapatalk

[Stimbert]

Thank you! I believe 20%


Sent from my iPhone using Tapatalk

[BrettLee3232]

Awesome boat, you & I have the same tastes. I'm still finding stuff to powder haha. I don't own a shop so it costs me a little bit but every bit worth it. I did my seat base, throttle knob, fenders, racks/swivels, speakers, flag holder, steering wheel cover.

I thought about doing the plates but was worried how they would hold up in the water? Will powder last submerged like that?

Love the seadek...I really want to do that to mine. That bow ladder is awesome...$350 seems very reasonable. I'm giving them a call tomorrow haha.

Looks awesome [emoji1319]


Sent from my iPhone using Tapatalk

[KG's Supra24]

Great looking additions. Boat looks awesome!

[Rakkasan]

That seadek looks great!!! Don't still have the templates by any chance do ya?;)

[Stimbert]

I had a local installer do it, I can call and see if it is something I can order now that it's all done


Sent from my iPhone using Tapatalk

[jtatexc]

I had a local installer do it, I can call and see if it is something I can order now that it's all done


Sent from my iPhone using Tapatalk
I was curious about the same thing. If I were to contact seadek would they now have a template to be able to send me the pieces?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Rakkasan]

It would be very smart on Seadeks part if they digitally saved all templates they received. I'm sure a lot of people here would buy it if all the leg work was done. I know I would.

[dusty2221]

I'm sure they do, but if not GatorStep does, reach out to them.

[jtatexc]

What would you guys guess the flooring would cost? More in the 500 range or more in the 1k? If around 500 I may consider that, if more I'm probably gonna do hydro turf for 250

Sent from my SAMSUNG-SM-G930A using Tapatalk

[dusty2221]

Closer to $1k than $500.

[Rakkasan]

Closer to $1k than $500.

Here the pricing for the Mojo on gatorsteps website. I'm sure pricing would be the same for other models.

http://www.gatorstep.com/online-store/!/MOOMBA-MOJO-2016-2017/p/77996637/category%3D21992961

[Ed_Geary]

I believe that is the nicest Moomba I have ever seen!!

[Stimbert]

Just spoke to them. They said they save everything. They have copies of every piece I have, the gunnels front to back, the flooring, the swim deck, the walkway. Even though they are the same boats they still highly recommend that they send out templates so you can make sure each piece fits how you like. It's all under Brian Stimbert. SCwakes number is 18557292531

Hopefully it helps you guys out!


Sent from my iPhone using Tapatalk

[BrettLee3232]

Just spoke to them. They said they save everything. They have copies of every piece I have, the gunnels front to back, the flooring, the swim deck, the walkway. Even though they are the same boats they still highly recommend that they send out templates so you can make sure each piece fits how you like. It's all under Brian Stimbert. SCwakes number is 18557292531

Hopefully it helps you guys out!


Sent from my iPhone using Tapatalk

How well does powder coat last in the water?


Sent from my iPhone using Tapatalk

[KG's Supra24]

What would you guys guess the flooring would cost? More in the 500 range or more in the 1k? If around 500 I may consider that, if more I'm probably gonna do hydro turf for 250

Sent from my SAMSUNG-SM-G930A using Tapatalk

I think its closer to the 1800 range, if i remember correctly.

I wouldn't mind getting the walk thru, step, and swim platform.

[Stimbert]

I'm sure it will hold up perfect. We coat cases for cameras that end up in sitting in the ocean for a few years at a time


Sent from my iPhone using Tapatalk

[BrettLee3232]

I'm sure it will hold up perfect. We coat cases for cameras that end up in sitting in the ocean for a few years at a time


Sent from my iPhone using Tapatalk

Sweet thanks [emoji120]


Sent from my iPhone using Tapatalk

[BrettLee3232]

I'm sure it will hold up perfect. We coat cases for cameras that end up in sitting in the ocean for a few years at a time


Sent from my iPhone using Tapatalk

Did you loose your swing away tongue? I just spoke with BoatMate & they said I would loose the swing.


Sent from my iPhone using Tapatalk

[Stimbert]

Yes. Forgot about that, I never used it before so it wasn't a big deal to me


Sent from my iPhone using Tapatalk

[BrettLee3232]

Yes. Forgot about that, I never used it before so it wasn't a big deal to me


Sent from my iPhone using Tapatalk

I don't use it either, just hate loosing it if I needed it haha first world problems.


Sent from my iPhone using Tapatalk

[Stimbert]

Lol


Sent from my iPhone using Tapatalk

[That Guy]

Interesting development on the bow steps and swing tongue...me thinks you could keep the steps if you made them removable? Like weld the base onto the tongue and a few inches up cut the steps off and make them slip into or over the base with a quick release pin, such as a hitch pin or something. Ahhh if only I could weld.

[wolfeman131]

Closer to $1k than $500.

I'm betting you need to add those two numbers together.

[jtatexc]

I'm betting you need to add those two numbers together.
Ouch. Think I'm gonna just go hydro turf

Sent from my SAMSUNG-SM-G930A using Tapatalk

[dusty2221]

Yup, I was just going off the 2 numbers given, lol.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[That Guy]

I got a quote for Seadek and just for the floor it was around $1500....nearing $2500 if you wanted gunnels, walkover and swim platform.

[BrettLee3232]

So a little more info. You need the extended tongue in order to get the removable steps. I gave boatmate my VIN number and they called me back a few hours later saying it wasn't possible with my shorter swing away tongue. Damnnnnitttttttt I just saved my self $350.


Sent from my iPhone using Tapatalk

[That Guy]

So a little more info. You need the extended tongue in order to get the removable steps. I gave boatmate my VIN number and they called me back a few hours later saying it wasn't possible with my shorter swing away tongue. Damnnnnitttttttt I just saved my self $350.


Sent from my iPhone using Tapatalk

LOL. How long is the standard vs extended tongue? I know the tongue on my 17 Craz is quite a bit longer than the one that was on my 15 Axis....both are Boatmate trailers...

[That Guy]

How did you mount the sub? Is it free air just mounted in the panel or did you build a box behind the panel somehow? Pics/measurements if so?

[Stimbert]

How did you mount the sub? Is it free air just mounted in the panel or did you build a box behind the panel somehow? Pics/measurements if so?

There is actually an outline on the back of the panel, cut it like a dotted line and that's it. I didn't build an enclosure or anything, it does great though! She bumps! [emoji41]


Sent from my iPhone using Tapatalk

[That Guy]

There is actually an outline on the back of the panel, cut it like a dotted line and that's it. I didn't build an enclosure or anything, it does great though! She bumps! [emoji41]
Sent from my iPhone using Tapatalk

Cool, didn't realize that so thanks for sharing. I'm pretty sure I'm going to build a box but good to hear it sounds good without one. I've heard otherwise even from my dealer but granted that was with a different sub.

[jtatexc]

https://uploads.tapatalk-cdn.com/20170212/c42c1d43d4a4924cfb8adc4245956029.jpghttps://uploads.tapatalk-cdn.com/20170212/69f91d6845a6cd4146ef276c3e7b8e6d.jpghttps://uploads.tapatalk-cdn.com/20170212/3d777fac576c59a095a27e3608d53946.jpghttps://uploads.tapatalk-cdn.com/20170212/16b9fde3491627f582b5f343804f0c7a.jpg


Sent from my iPhone using Tapatalk
Where did you get the fenders? From boatmate directly? I was under there this weekend and didn't realize how easy they are to get off.are there aftermarket fenders that you have heard of?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Stimbert]

Yep, these are directly from boatmate. Gave him my vin, they know exactly what ones I had. Told him what width wheels I was changing to and these are what we came up with. 4 bolts and you reuse the pads.


Sent from my iPhone using Tapatalk

[jtatexc]

Yep, these are directly from boatmate. Gave him my vin, they know exactly what ones I had. Told him what width wheels I was changing to and these are what we came up with. 4 bolts and you reuse the pads.


Sent from my iPhone using Tapatalk
If you don't mind me asking how much did you pay for them including shipping?

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Stimbert]

I don't remember exactly but not much. 100ish each


Sent from my iPhone using Tapatalk

[jtatexc]

I don't remember exactly but not much. 100ish each


Sent from my iPhone using Tapatalk
Think I'm gonna go that route, the fact they are that easy is a game changer

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Stimbert]

Lol. Sweet!


Sent from my iPhone using Tapatalk

[dusty2221]

How wide is the step down you added to the seat? Did you just match the walkway width on the sundeck? If you had to cut the HDPE or Starboard, how did you finish the edge?

I'm about to order the material and cut my foam, but having a clean edge on the cut HDPE concerns me.

[Stimbert]

Yes, I just matched the walkway. Just used a router to round off the edges.


Sent from my iPhone using Tapatalk

[wolfeman131]

HDPE is very easy to work with. Carbide blade on a circular saw cuts it like butter and a round over bit in the router to ease the edges.

[dusty2221]

Yeah, I've cut it with the circular table saw, just haven't had any project where the edge needed routing so I was curious. I have some scrap I'm going to practice on. Appreciate the feedback!

Sent from my SAMSUNG-SM-G930A using Tapatalk