PDA

View Full Version : 2009 Outback direct drive propeller size?



nexxis
12-27-2016, 01:58 PM
I have a 2009 Outback** direct drive. What is the factory propeller size? Including the bore size.

I am considering getting a 3-blade Acme 543 (13 x 11.5) or the 1229 (13 x 11). I am probably 50/50 on wakeboarding and wakesurfing. My OEM prop seems to struggle wakesurfing with 1,200-lbs ballasts, trying to maintain consistent speed.

tag: impeller

kaneboats
12-28-2016, 10:11 AM
In the old days they were 13 x 13. Not sure if your might have been a 13 x 12. Either way, you should do better with either choice above for a heavier load.

Jordy Dag
12-30-2016, 07:24 PM
Ill check mine when I get home tonight. I cant recall off the top of my head. Im almost positive its a 13x13 on mine with a 1 1/8 shaft size but Ill let you know in a couple hours. I run 2000 + in mine and I have no problems wakesurfing with my factory 3 blade

Sent from my SGH-I337M using Tapatalk

Jordy Dag
12-31-2016, 04:23 PM
After a quick check, I confirmed the prop on my Outback is a 13x13. Hope this helps you out

Sent from my SGH-I337M using Tapatalk