PDA

View Full Version : wakek plate not moving much



volfan705
10-04-2016, 02:05 PM
I have a 2007 Moomba XLV and my wake plate only moves very slightly.. like not more than 1 inch.. the indicator on the dash also shows its not moving much. can I get some advise on how to trouble shoot?

wolfeman131
10-04-2016, 02:10 PM
I think your boat still has the hydraulic actuator. Start by checking the fluid level. There should be a reservoir in the engine compartment. It may be mounted to the aluminum bracing that is up against the rear bench seat.

VA LSV
10-04-2016, 09:05 PM
Agree, check fluid level first. Uses standard ATF fluid. If it is low you will need to operate it several times after topping off the reservoir to work the air out. Check for leaks at the actuators on the wake plate.

volfan705
10-05-2016, 01:34 PM
perfect going for an evening ride this evening and will check that out.