Log in

View Full Version : Repair Liquid Force Machine Deep Ding


NickBoj
09-13-2016, 06:50 PM
Went double surfing today and the boards collided causing a massive gash in the side of the fiberglass board. The board is a Liquid Force Machine, and I would like to get it back up and running as fast as possible before the end of the season. Id assume that you'd fill it with a type of epoxy, but Im not sure.
Anything helps!
http://uploads.tapatalk-cdn.com/20160913/9c994de45f705a1b0c0302204ef0d70f.jpg
smorris7
09-13-2016, 06:59 PM
http://uploads.tapatalk-cdn.com/20160913/2029abf47f138cf4e8843a8c3bf73548.jpg24988


Sent from my iPhone using Tapatalk
NickBoj
09-13-2016, 07:08 PM
http://uploads.tapatalk-cdn.com/20160913/2029abf47f138cf4e8843a8c3bf73548.jpg24988


Sent from my iPhone using Tapatalk

Thank you for the quick response! Going to purchase that right now. I figured it was some sort of Epoxy.
smorris7
09-13-2016, 07:19 PM
Works great. I have used it many times.


Sent from my iPhone using Tapatalk
MJHSupra
09-13-2016, 09:54 PM
I think that is the same type I purchased awhile back. I think it was called "Ding All' repair kit.
Pretty sure it had everything in one package. Easy to use.
Chaos
09-16-2016, 12:47 PM
Yes you will want to use epoxy. Personally, I prefer 2-part epoxies like the board was made with compared to UV curing, but UV curing epoxy is easy enough for temporary fixes. The main thing you want o do is sand all around the ding, sand the paint off till you get to the fiberglass. Resins will not bond to the painted surface, not to mention all the wax from polishing, etc.

Nick