Fastest1
09-01-2016, 10:34 PM
Just what the title says.
Original fiberglass mufflers leaked. I had Larry build a set of straight pipes. Being that I have the FAE itself it should still be reasonable in sound. I haven't fired it up yet.http://uploads.tapatalk-cdn.com/20160902/afb05d217be1e63d0a4a63a80269d45c.jpg
While I was in there I did go ahead and change the prop shaft seal and bushings. I cleaned up the shaft itself in my lathe. Also changed the steering cable. Rerouted the fuel lines. I also installed a second bilge pump with an Attwood water level sensor. I have it wired automatic/manual. It will come on if the water level is too high or I can switch it on. http://uploads.tapatalk-cdn.com/20160902/bc4184acc8874d707939c44862154f20.jpghttp://uploads.tapatalk-cdn.com/20160902/76590143a78cd3c56e40e78986ac8235.jpg Also threw my repaired Acme back on.
Renting a house on Lake Whitney this weekend.
Sent from my iPhone using Tapatalk
Original fiberglass mufflers leaked. I had Larry build a set of straight pipes. Being that I have the FAE itself it should still be reasonable in sound. I haven't fired it up yet.http://uploads.tapatalk-cdn.com/20160902/afb05d217be1e63d0a4a63a80269d45c.jpg
While I was in there I did go ahead and change the prop shaft seal and bushings. I cleaned up the shaft itself in my lathe. Also changed the steering cable. Rerouted the fuel lines. I also installed a second bilge pump with an Attwood water level sensor. I have it wired automatic/manual. It will come on if the water level is too high or I can switch it on. http://uploads.tapatalk-cdn.com/20160902/bc4184acc8874d707939c44862154f20.jpghttp://uploads.tapatalk-cdn.com/20160902/76590143a78cd3c56e40e78986ac8235.jpg Also threw my repaired Acme back on.
Renting a house on Lake Whitney this weekend.
Sent from my iPhone using Tapatalk