PDA

View Full Version : 2001 moomba ignition help.



jeff6264
08-02-2016, 05:31 PM
Have a new motor and can't get power to coil. 5.7 carb motor. Est ignition. The diagram(I have the manual) says the purple wire supplies 12v power to the coil, then the ignition module. I have 12v everywhere. When I turn the Key to start I lose the 12v to the coil. HELP! I installed new, dist, coil, cap, plugs, wires. Tested key switch, tested nuetral switch, kill switch, slave selonoid. What am I missing?

ranger098
08-05-2016, 04:54 PM
Do you have 12v at the dash? check that purple wire as it goes to the ignition breaker switch. then trace that wire all the way back to the alternator. The issue has gotta be somewhere inbetween there.