Ballast Stops

[snyderaaron]

Ballast stops filling or emptying when boat is put in gear. Any ideas?


Sent from my iPhone using Tapatalk

[mmandley]

Nope not unless they put a safety in so you can do that while moving lol.

I always fill and drain at rest but mine does work while moving.

[smorris7]

Doesn't fill well while moving but should empty no problem at any speed.


Sent from my iPhone using Tapatalk

[snyderaaron]

Mine filled and emptied before while moving, but just stopped working last nihjt


Sent from my iPhone using Tapatalk

[KG's Supra24]

Is it throwing an error code?

[JASONZ]

Do you use the FILL ALL button?
The three pumps are routed through a single 60amp breaker. Starting all three pumps at the same time can cause an amp surge and trip it.
I had this happen a few times and I now always stagger the start and it works fine.

[snyderaaron]

Is it throwing an error code?

I'm not seeing any blinking or codes.

[snyderaaron]

Do you use the FILL ALL button?
The three pumps are routed through a single 60amp breaker. Starting all three pumps at the same time can cause an amp surge and trip it.
I had this happen a few times and I now always stagger the start and it works fine.

I was empyting all at once. But also noticed when I just tried filling one, it would not fill.

[KG's Supra24]

I've had mine throw an error up on the screen while filling underway.

I think the key would be to at least get it started while sitting still and then cruise, at a moderate speed, while filling.

[jmvotto]

my timers started and I had an air lock or something so I had to adjust the timers by extending the timer cuz the CPU thought there were full .

[snyderaaron]

my timers started and I had an air lock or something so I had to adjust the timers by extending the timer cuz the CPU thought there were full .

I tired making them longer and that didn't work as well. Hoping it was just a one night glitch.