PDA

View Full Version : Ballast issues - 2015 Mondo



JesseC
07-24-2016, 11:47 PM
Ok so I have a very strange issue with my port side ballast. I noticed the boat was listing and checked the port ballast bag. It was about half full and the pump was not making any sound. I turned the boat electronics off an then on and still got nothing. The starboard and center ballast work fine. So here goes the strange part....I pulled the panel on the port side and flipped the port switch and got nothing , then I flipped the center switch and it works as expected. When I unplugged the port and center pump and swapped them, both pumps work off of both switches....wtf???? So I thought must have been a bad connection so I swap them back and the center works but not the port pump. I did this several times with the same result. Anybody got any clues?? I ended up plugging the center switch to the port pump to empty the bag.


Sent from my iPhone using Tapatalk